HP LaserJet 1018 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
hp 1018 not responding on Fedora 10 x86 [solved]
Posted by: Abu Noor-Eddin ()
Date: July 11, 2009 07:36AM

Hello all,

I have just followed the instruction exactly to install hp 1018 driver and everything went fine, however, when I begin to print anything the printer is not responding.

Any ideas?



Edited 1 time(s). Last edit at 07/11/2009 09:09AM by rickrich.

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: rickrich ()
Date: July 11, 2009 08:00AM

Do:
# usb_printerid /dev/usb/lp0
What does that say???

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: Abu Noor-Eddin ()
Date: July 11, 2009 08:07AM

It says

GET_DEVICE_ID string:
MFG:Hewlett-Packard;MDL:HP LaserJet 1018;CMD:ACL;CLS:PRINTER;DES:HP LaserJet 1018;FWVER:20051028;

rickrich Wrote:
-------------------------------------------------------
> Do:
>
> # usb_printerid /dev/usb/lp0
>
> What does that say???

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: rickrich ()
Date: July 11, 2009 08:10AM

What did you use for the URI???

From the INSTALL file:
CUPS USB NOTES
--------------
    If you are using the USB port, then the URI should be:
        usb:/dev/usb/lp0
        usb:/dev/usb/lp1
    OR
        usb://Samsung/CLP-310%20Series
        usb://Samsung/CLP-310%20Series
        usb://HP/Color%20LaserJet%20CP1215
        usb://HP/Color%20LaserJet%202600n
        usb://HP/LaserJet%201000
        usb://HP/LaserJet%201005
        usb://HP/LaserJet%201018
        usb://HP/LaserJet%201020
        usb://HP/LaserJet%20P1005
        usb://HP/LaserJet%20P1006
        usb://HP/LaserJet%20P1505

    Don't use hp://<whatever> because that is for hplib (a closed source,
    proprietary driver).

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: Abu Noor-Eddin ()
Date: July 11, 2009 08:15AM

I tried both

usb:/dev/usb/lp0
usb:/dev/usb/lp1

Shall I try usb://HP/LaserJet%201018 ?

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: Abu Noor-Eddin ()
Date: July 11, 2009 08:17AM

usb://HP/LaserJet%201018 is not working also

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: rickrich ()
Date: July 11, 2009 08:25AM

What does:
$ cd foo2zjs
$ foo2zjs-wrapper -P -z1 -L0 testpage.ps > xxx.prn
$ cp xxx.prn /dev/usb/lp0
do? Should print...

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: Abu Noor-Eddin ()
Date: July 11, 2009 08:45AM

Only prints test page if I exceute the command cp xxx.prn /dev/usb/lp0, but I cannot print any other papers via file-->print from any software!

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86
Posted by: rickrich ()
Date: July 11, 2009 09:09AM

It is a CUPS problem, then!

Printing -> hp1018 -> Policies -> Enabled
Printing -> hp1018 -> Policies -> Accepting jobs

Works fine on Fedora 10 here!!!!

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86 [solved]
Posted by: Abu Noor-Eddin ()
Date: July 11, 2009 11:52AM

Yes these setting as you typed but still not working!

How can I delete everything related to printer driver I may install earlier and begin a new installation?

Thanks anyway.

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86 [solved]
Posted by: rickrich ()
Date: July 11, 2009 12:30PM

It is a CUPS problem, not a foo2zjs problem. yum update cups.

Options: ReplyQuote
Re: hp 1018 not responding on Fedora 10 x86 [solved]
Posted by: Abu Noor-Eddin ()
Date: July 12, 2009 12:50AM

Okay, thanks.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.