HP LaserJet 1018 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
Fedora 10. LaserJet 1018 firmware can't be loaded [USB issue; solved]
Posted by: mamon ()
Date: January 23, 2009 06:28PM

Hi. I have a problem with loading firmware into LJ 1018.
I have read INSTALL and followed instruction:
# make uninstall
# make
# make install
# make install-hetplug

then unplug and re-plug USB printer

# make cups

-----------------------------------------------------
# usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
MFG:Hewlett-Packard;MDL:HP LaserJet 1018;CMD:ACL;CLS:PRINTER;DES:HP LaserJet 1018;

-----------------------------------------------------
# tail /var/log/messages
Jan 24 01:40:33 localhost kernel: usb 2-3.1: configuration #1 chosen from 1 choice
Jan 24 01:40:33 localhost kernel: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
Jan 24 01:40:33 localhost kernel: usb 2-3.1: New USB device found, idVendor=03f0, idProduct=4117
Jan 24 01:40:33 localhost kernel: usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 24 01:40:33 localhost kernel: usb 2-3.1: Product: HP LaserJet 1018
Jan 24 01:40:33 localhost kernel: usb 2-3.1: Manufacturer: Hewlett-Packard
Jan 24 01:40:33 localhost kernel: usb 2-3.1: SerialNumber: KP1DCX6
Jan 24 01:40:33 localhost /etc/hotplug/usb/hplj1018: foo2zjs: loading HP LaserJet 1018 firmware /usr/share/foo2zjs/firmware/sihp1018.dl to /dev/usb/lp0 ...
Jan 24 01:42:26 localhost kernel: usblp0: nonzero write bulk status received: -71
Jan 24 01:42:26 localhost /etc/hotplug/usb/hplj1018: foo2zjs: ... download failed.

-----------------------------------------------------
# dmesg
...
usb 2-3.1: new high speed USB device using ehci_hcd and address 9
usb 2-3.1: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
usb 2-3.1: New USB device found, idVendor=03f0, idProduct=4117
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.1: Product: HP LaserJet 1018
usb 2-3.1: Manufacturer: Hewlett-Packard
usb 2-3.1: SerialNumber: KP1DCX6
usblp0: nonzero write bulk status received: -71
usblp0: nonzero write bulk status received: -71
usb 2-3.1: USB disconnect, address 9
usblp0: removed
usb 2-3.1: new high speed USB device using ehci_hcd and address 10
usb 2-3.1: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
usb 2-3.1: New USB device found, idVendor=03f0, idProduct=4117
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.1: Product: HP LaserJet 1018
usb 2-3.1: Manufacturer: Hewlett-Packard
usb 2-3.1: SerialNumber: KP1DCX6
usblp0: nonzero write bulk status received: -71

Max.



Edited 2 time(s). Last edit at 01/24/2009 04:53AM by rickrich.

Options: ReplyQuote
Re: Fedora 10. LaserJet 1018 firmware can't be loaded
Posted by: rickrich ()
Date: January 23, 2009 07:33PM

USB issue.

You have a USB problem, then. Put it on a different USB controller or change the cables. Don't use an unpowered hub!

Options: ReplyQuote
Re: Fedora 10. LaserJet 1018 firmware can't be loaded [USB issue]
Posted by: mamon ()
Date: January 24, 2009 04:39AM

Thank you.

It works.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.