HP LaserJet 1018 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
hp1018 install problem (FreeBSD 6.2)
Posted by: macrospb ()
Date: June 03, 2008 09:38AM

sory for my Eng, i speack a little bit :)
log
------------------------------------------------------------
buh# gmake
#
# Dependencies...
#
# ... OK!
#
cd icc2ps; gmake all
gmake[1]: Entering directory `/usr/local/Buh/driver/foo2zjs/icc2ps'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory `/usr/local/Buh/driver/foo2zjs/icc2ps'

It is possible that certain products which can be built using this
software module might form inventions protected by patent rights in
some countries (e.g., by patents about arithmetic coding algorithms
owned by IBM and AT&T in the USA). Provision of this software by the
author does NOT include any licences for any patents. In those
countries where a patent licence is required for certain applications
of this software module, you will have to obtain such a licence
yourself.
--------------------------------------------------------------------
buh# ls -la
total 20962
drwxrwxrwx 4 nobody nobody 512 Jun 3 16:32 .
drwxrwxrwx 18 miha windows 1024 Jan 23 2003 ..
drwxrwxrwx 6 nobody nobody 4096 Jun 3 17:05 foo2zjs
-rwxrwxrwx 1 nobody nobody 6563840 May 27 11:52 foo2zjs.tar
-rwxrwxrwx 1 nobody nobody 1551647 Jan 23 2003 foo2zjs.tar.gz
drwxrwxrwx 6 nobody nobody 4096 Jun 3 15:58 foo2zjs1
-rwxrwxrwx 1 nobody nobody 12942029 Aug 2 2007 ghostscript-8.60.tar.bz2
-rwxrwxrwx 1 nobody nobody 129092 May 2 2006 sihp1018.dl
-rwxrwxrwx 1 nobody nobody 129092 May 2 2006 sihp1018.img
-rwxrwxrwx 1 nobody nobody 70544 Jun 3 12:52 sihp1018.tar.gz
buh#
---------------------------------------------------------------------
buh# ls /dev/ugen*
/dev/ugen0 /dev/ugen0.1

---------------------------------------------------------------------

I don't know exact where is a a error.

Options: ReplyQuote
Re: hp1018 install problem (FreeBSD 6.2)
Posted by: rickrich ()
Date: June 03, 2008 10:20AM

Do you follow ALL instructions?

From the INSTALL file:

USB NOTES FOR HP LJ 1018/1020/P1005/P1006/P1505
- Build the kernel without the ulpt driver.
e.g.
# vi /usr/src/sys/i386/conf/GENERIC
comment out 'device ulpt'
# cd /usr/src/
# make buildkernel KERNCONF=GENERIC
# make installkernel KERNCONF=GENERIC
reboot

$ cd foo2zjs
$ gmake
$ ./getweb 1018
# gmake install
# cat /usr/share/foo2zjs/firmware/sihp1018.dl > /dev/ugen0.1



Edited 3 time(s). Last edit at 06/03/2008 10:26AM by rickrich.

Options: ReplyQuote
Re: hp1018 install problem (FreeBSD 6.2)
Posted by: macrospb ()
Date: June 04, 2008 02:22AM

instructions:

# pkg_add -r wget
# pkg_add -r gmake - yes
# pkg_add -r ghostscript-gnu - yes
# pkg_add -r cups - no - i have LPD
# pkg_add -r foomatic-filters - yes

USB NOTES FOR HP LJ 1018/1020/P1005/P1006/P1505
- Build the kernel without the ulpt driver.
e.g.
....................... yes

- Do one of these lines each time the printer is powered up:
# cat /usr/share/foo2zjs/firmware/sihp1018.dl > /dev/ugen0.1 - yes

Options: ReplyQuote
Re: hp1018 install problem (FreeBSD 6.2)
Posted by: rickrich ()
Date: June 04, 2008 03:29AM

$ cat /usr/share/foo2zjs/firmware/sihp1018.dl > /dev/ugen0.1
$ foo2zjs-wrapper -z1 -L0 testpage.ps > xxx
# cp xxx > /dev/ugen0.1

What does that say???

Options: ReplyQuote
Re: hp1018 install problem (FreeBSD 6.2)
Posted by: macrospb ()
Date: June 18, 2008 10:20AM

all right, i was stupid or luser :) RTFM - read to f... manaul and it will be ok :)

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.