General foo2hbpl2 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
FujiXerox M225dw
Posted by: sashka76 ()
Date: December 02, 2015 09:24PM

Hi.

I have the printer mentioned within the subject (on Arch Linux OS). After screwing around :-) with various drivers and Macintosh packages, I came across your site and had the best advancement so far. I installed your "Fuji Xerox DocuPrint M215" (since there is nothing for M225dw) and the printer can now print Self Test Page! When trying to print anything else, including regular Print Test Page, the log (see below) seems to indicate that everything is working. NHowever, nothing at all comes out of the printer (which is a bit of a problem :-)).

What could the problem be? If my printer is not supported, do you have any plans to add support for it in the future? What alternatives do I have (except installing FreeBSD, or whatever the printer MacOS drivers are compiled for). Last question (perhaps, not relevant to printing, but maybe one can point me in the right direction): can I make scanner capabilities of my unit work under linux (it's a printer-scanner all-in-one model)?

Thanks a lot.


Here is the CUPS error_log (the one that seems to have no errors, but produces no print outs either):

I [03/Dec/2015:13:13:38 +1100] [Job 260] Adding start banner page "none".
I [03/Dec/2015:13:13:38 +1100] [Job 260] Adding end banner page "none".
I [03/Dec/2015:13:13:38 +1100] [Job 260] File of type application/vnd.cups-pdf-banner queued by "anonymous".
D [03/Dec/2015:13:13:38 +1100] [Job 260] hold_until=0
I [03/Dec/2015:13:13:38 +1100] [Job 260] Queued on "Fuji_Xerox-DocuPrint_M225_dw" by "anonymous".
D [03/Dec/2015:13:13:38 +1100] [Job 260] time-at-processing=1449108818
D [03/Dec/2015:13:13:38 +1100] [Job 260] 4 filters for job:
D [03/Dec/2015:13:13:38 +1100] [Job 260] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [03/Dec/2015:13:13:38 +1100] [Job 260] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [03/Dec/2015:13:13:38 +1100] [Job 260] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [03/Dec/2015:13:13:38 +1100] [Job 260] foomatic-rip (application/vnd.cups-postscript to printer/Fuji_Xerox-DocuPrint_M225_dw, cost 0)
D [03/Dec/2015:13:13:38 +1100] [Job 260] job-sheets=none,none
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[0]="Fuji_Xerox-DocuPrint_M225_dw"
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[1]="260"
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[2]="anonymous"
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[3]="Test Page"
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[4]="1"
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[5]="job-uuid=urn:uuid:8ea2f58b-4b87-30cf-53b4-f22eefc41ad1 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1449108818 time-at-processing=1449108818"
D [03/Dec/2015:13:13:38 +1100] [Job 260] argv[6]="/var/spool/cups/d00260-001"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[7]="CUPS_STATEDIR=/run/cups"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[8]="HOME=/var/spool/cups/tmp"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[10]="SERVER_ADMIN=root@cosmic"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[11]="SOFTWARE=CUPS/2.1.0"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[13]="USER=root"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[14]="CUPS_MAX_MESSAGE=2047"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[17]="IPP_PORT=631"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[18]="CHARSET=utf-8"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[19]="LANG=en_GB.UTF-8"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[20]="PPD=/etc/cups/ppd/Fuji_Xerox-DocuPrint_M225_dw.ppd"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[21]="RIP_MAX_CACHE=128m"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[23]="DEVICE_URI=usb://FX/DocuPrint%20M225%20dw?serial=0000DN4--808355"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[24]="PRINTER_INFO=Fuji_Xerox-DocuPrint_M225_dw"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[25]="PRINTER_LOCATION="
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[26]="PRINTER=Fuji_Xerox-DocuPrint_M225_dw"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[27]="PRINTER_STATE_REASONS=none"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[28]="CUPS_FILETYPE=document"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [03/Dec/2015:13:13:38 +1100] [Job 260] envp[30]="AUTH_I****"
I [03/Dec/2015:13:13:38 +1100] [Job 260] Started filter /usr/lib/cups/filter/bannertopdf (PID 22632)
I [03/Dec/2015:13:13:38 +1100] [Job 260] Started filter /usr/lib/cups/filter/pdftopdf (PID 22633)
I [03/Dec/2015:13:13:38 +1100] [Job 260] Started filter /usr/lib/cups/filter/pdftops (PID 22634)
I [03/Dec/2015:13:13:38 +1100] [Job 260] Started filter /usr/lib/cups/filter/foomatic-rip (PID 22635)
I [03/Dec/2015:13:13:38 +1100] [Job 260] Started backend /usr/lib/cups/backend/usb (PID 22636)
D [03/Dec/2015:13:13:38 +1100] [Job 260] pdftops - copying to temp print file "/var/spool/cups/tmp/0586a566d6792"
D [03/Dec/2015:13:13:38 +1100] [Job 260] Loading USB quirks from "/usr/share/cups/usb".
D [03/Dec/2015:13:13:39 +1100] [Job 260] Calling FindDeviceById(cups-Fuji_Xerox-DocuPrint_M225_dw)
D [03/Dec/2015:13:13:39 +1100] [Job 260] Found device /org/freedesktop/ColorManager/devices/cups_Fuji_Xerox_DocuPrint_M225_dw
D [03/Dec/2015:13:13:39 +1100] [Job 260] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [03/Dec/2015:13:13:39 +1100] [Job 260] 'CM Color Calibration' Mode in SPOOLER-LESS: Off
D [03/Dec/2015:13:13:39 +1100] [Job 260] Getting input from file
D [03/Dec/2015:13:13:39 +1100] [Job 260] foomatic-rip version 1.2.0 running...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Parsing PPD file ...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option ColorSpace
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option PageSize
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option Quality
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option ColorMode
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option Resolution
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option ImageableArea
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option PaperDimension
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option MediaType
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option Copies
D [03/Dec/2015:13:13:39 +1100] [Job 260] PDF template file doesn't have form. It's okay.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option halftone
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option NupOrient
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option NupPages
D [03/Dec/2015:13:13:39 +1100] [Job 260] Added option Font
D [03/Dec/2015:13:13:39 +1100] [Job 260] Parameter Summary
D [03/Dec/2015:13:13:39 +1100] [Job 260] -----------------
D [03/Dec/2015:13:13:39 +1100] [Job 260] Spooler: cups
D [03/Dec/2015:13:13:39 +1100] [Job 260] Printer: Fuji_Xerox-DocuPrint_M225_dw
D [03/Dec/2015:13:13:39 +1100] [Job 260] Shell: /bin/bash
D [03/Dec/2015:13:13:39 +1100] [Job 260] PPD file: /etc/cups/ppd/Fuji_Xerox-DocuPrint_M225_dw.ppd
D [03/Dec/2015:13:13:39 +1100] [Job 260] ATTR file:
D [03/Dec/2015:13:13:39 +1100] [Job 260] Printer model: Fuji Xerox DocuPrint M215 Foomatic/foo2hbpl2 (recommended)
D [03/Dec/2015:13:13:39 +1100] [Job 260] Job title: Test Page
D [03/Dec/2015:13:13:39 +1100] [Job 260] File(s) to be printed:
D [03/Dec/2015:13:13:39 +1100] [Job 260] <STDIN>
D [03/Dec/2015:13:13:39 +1100] [Job 260] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [03/Dec/2015:13:13:39 +1100] [Job 260] Printing system options:
D [03/Dec/2015:13:13:39 +1100] [Job 260] Pondering option 'job-uuid=urn:uuid:8ea2f58b-4b87-30cf-53b4-f22eefc41ad1'
D [03/Dec/2015:13:13:39 +1100] [Job 260] Unknown option job-uuid=urn:uuid:8ea2f58b-4b87-30cf-53b4-f22eefc41ad1.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Pondering option 'job-originating-host-name=localhost'
D [03/Dec/2015:13:13:39 +1100] [Job 260] Unknown option job-originating-host-name=localhost.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Pondering option 'date-time-at-creation='
D [03/Dec/2015:13:13:39 +1100] [Job 260] Unknown option date-time-at-creation=.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Pondering option 'date-time-at-processing='
D [03/Dec/2015:13:13:39 +1100] [Job 260] Unknown option date-time-at-processing=.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Pondering option 'time-at-creation=1449108818'
D [03/Dec/2015:13:13:39 +1100] [Job 260] Unknown option time-at-creation=1449108818.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Pondering option 'time-at-processing=1449108818'
D [03/Dec/2015:13:13:39 +1100] [Job 260] Unknown option time-at-processing=1449108818.
D [03/Dec/2015:13:13:39 +1100] [Job 260] CM Color Calibration Mode in CUPS: Off
D [03/Dec/2015:13:13:39 +1100] [Job 260] Options from the PPD file:
D [03/Dec/2015:13:13:39 +1100] [Job 260] ================================================
D [03/Dec/2015:13:13:39 +1100] [Job 260] File: <STDIN>
D [03/Dec/2015:13:13:39 +1100] [Job 260] ================================================
D [03/Dec/2015:13:13:39 +1100] [Job 260] Loaded 119 quirks.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Printing on printer with URI: usb://FX/DocuPrint%20M225%20dw?serial=0000DN4--808355
D [03/Dec/2015:13:13:39 +1100] [Job 260] libusb_get_device_list=11
D [03/Dec/2015:13:13:39 +1100] [Job 260] STATE: +connecting-to-device
D [03/Dec/2015:13:13:39 +1100] [Job 260] STATE: -connecting-to-device
D [03/Dec/2015:13:13:39 +1100] [Job 260] Device protocol: 2
I [03/Dec/2015:13:13:39 +1100] [Job 260] Sending data to printer.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] Read 512 bytes of back-channel data...
D [03/Dec/2015:13:13:39 +1100] [Job 260] PID 22632 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [03/Dec/2015:13:13:39 +1100] [Job 260] PID 22633 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [03/Dec/2015:13:13:39 +1100] [Job 260] Printer make and model: Fuji Xerox DocuPrint M215
D [03/Dec/2015:13:13:39 +1100] [Job 260] Running command line for pstops: pstops 260 anonymous 'Test Page' 1 'job-uuid=urn:uuid:8ea2f58b-4b87-30cf-53b4-f22eefc41ad1 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1449108818 time-at-processing=1449108818'
D [03/Dec/2015:13:13:39 +1100] [Job 260] Using image rendering resolution 600 dpi
D [03/Dec/2015:13:13:39 +1100] [Job 260] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/0586a566d6792
D [03/Dec/2015:13:13:39 +1100] [Job 260] Started filter gs (PID 22643)
D [03/Dec/2015:13:13:39 +1100] [Job 260] Started filter pstops (PID 22644)
D [03/Dec/2015:13:13:44 +1100] [Job 260] Page = 595x842; 9,12 to 586,830
D [03/Dec/2015:13:13:44 +1100] [Job 260] slow_collate=0, slow_duplex=0, slow_order=0
D [03/Dec/2015:13:13:44 +1100] [Job 260] Before copy_comments - %!PS-Adobe-3.0
D [03/Dec/2015:13:13:44 +1100] [Job 260] %!PS-Adobe-3.0
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%BoundingBox: 0 0 595 842
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%HiResBoundingBox: 0 0 595.00 842.00
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%Creator: GPL Ghostscript 918 (ps2write)
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%LanguageLevel: 2
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%CreationDate: D:20151203131339+11'00'
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%Pages: 1
D [03/Dec/2015:13:13:44 +1100] [Job 260] %%EndComments
D [03/Dec/2015:13:13:44 +1100] [Job 260] Before copy_prolog - %%BeginProlog
D [03/Dec/2015:13:13:44 +1100] [Job 260] Filetype: PostScript
D [03/Dec/2015:13:13:44 +1100] [Job 260] Reading PostScript input ...
D [03/Dec/2015:13:13:44 +1100] [Job 260] --> This document is DSC-conforming!
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found %RBINumCopies: 1
D [03/Dec/2015:13:13:44 +1100] [Job 260] -----------
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginProlog
D [03/Dec/2015:13:13:44 +1100] [Job 260] Before copy_setup - %%Page: 1 1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Before page loop - %%Page: 1 1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Copying page 1...
D [03/Dec/2015:13:13:44 +1100] [Job 260] pagew = 577.0, pagel = 818.0
D [03/Dec/2015:13:13:44 +1100] [Job 260] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [03/Dec/2015:13:13:44 +1100] [Job 260] PageLeft = 9.0, PageRight = 586.0
D [03/Dec/2015:13:13:44 +1100] [Job 260] PageTop = 830.0, PageBottom = 12.0
D [03/Dec/2015:13:13:44 +1100] [Job 260] PageWidth = 595.0, PageLength = 842.0
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%EndProlog
D [03/Dec/2015:13:13:44 +1100] [Job 260] -----------
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginSetup
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *Quality normal
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: Quality=normal
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: Quality=normal
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: Quality=normal
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *halftone default
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: halftone=default
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: halftone=default
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: halftone=default
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *Resolution 600x600dpi
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: Resolution=600x600dpi
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: Resolution=600x600dpi
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: Resolution=600x600dpi
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *PageSize A4
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: PageSize=A4
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: PageSize=A4
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: PageSize=A4
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *MediaType plain
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: MediaType=plain
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: MediaType=plain
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: MediaType=plain
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *NupOrient port
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: NupOrient=port
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: NupOrient=port
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: NupOrient=port
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *NupPages 1up
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: NupPages=1up
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: NupPages=1up
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: NupPages=1up
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginFeature: *Copies 1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: Copies=1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %% FoomaticRIPOptionSetting: Copies=1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Option: Copies=1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Setting option
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%EndSetup
D [03/Dec/2015:13:13:44 +1100] [Job 260] Inserting PostScript code for CUPS' page accounting
D [03/Dec/2015:13:13:44 +1100] [Job 260] -----------
D [03/Dec/2015:13:13:44 +1100] [Job 260] New page: %%Page: 1 1
D [03/Dec/2015:13:13:44 +1100] [Job 260] Found: %%BeginPageSetup
D [03/Dec/2015:13:13:44 +1100] [Job 260] Inserting option code into "PageSetup" section.
D [03/Dec/2015:13:13:44 +1100] [Job 260] Wrote 1 pages...
D [03/Dec/2015:13:13:44 +1100] [Job 260] PID 22644 (pstops) exited with no errors.
D [03/Dec/2015:13:13:44 +1100] [Job 260] PID 22643 (gs) exited with no errors.
D [03/Dec/2015:13:13:44 +1100] [Job 260] Flushing FIFO.
D [03/Dec/2015:13:13:44 +1100] [Job 260] PID 22634 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [03/Dec/2015:13:13:44 +1100] [Job 260] Starting renderer with command: "foo2hbpl2-wrapper -r600x600 -p1 -m1 -n1 "
D [03/Dec/2015:13:13:44 +1100] [Job 260] Starting process "kid3" (generation 1)
D [03/Dec/2015:13:13:44 +1100] [Job 260] Starting process "kid4" (generation 2)
D [03/Dec/2015:13:13:44 +1100] [Job 260] Starting process "renderer" (generation 2)
D [03/Dec/2015:13:13:44 +1100] [Job 260] JCL: 2345X@PJL
D [03/Dec/2015:13:13:44 +1100] [Job 260] <job data>
D [03/Dec/2015:13:13:46 +1100] [Job 260] Closing renderer
D [03/Dec/2015:13:13:47 +1100] [Job 260] PAGE: 1 1
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] renderer exited with status 0
D [03/Dec/2015:13:13:47 +1100] [Job 260] kid4 exited with status 0
D [03/Dec/2015:13:13:47 +1100] [Job 260] kid3 finished
D [03/Dec/2015:13:13:47 +1100] [Job 260] kid3 exited with status 0
D [03/Dec/2015:13:13:47 +1100] [Job 260] Closing foomatic-rip.
D [03/Dec/2015:13:13:47 +1100] [Job 260] PID 22635 (/usr/lib/cups/filter/foomatic-rip) exited with no errors.
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 8192 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Read 3074 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Wrote 3074 bytes of print data...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Sent 68610 bytes...
D [03/Dec/2015:13:13:47 +1100] [Job 260] Waiting for read thread to exit...
D [03/Dec/2015:13:13:47 +1100] [Job 260] PID 22636 (/usr/lib/cups/backend/usb) exited with no errors.
D [03/Dec/2015:13:13:47 +1100] [Job 260] time-at-completed=1449108827
I [03/Dec/2015:13:13:47 +1100] [Job 260] Job completed.
D [03/Dec/2015:13:13:47 +1100] [Job 260] Removing document files.
D [03/Dec/2015:13:13:48 +1100] [Job 260] Unloading...

Options: ReplyQuote
Re: FujiXerox M225dw
Posted by: sashka76 ()
Date: December 21, 2015 10:51PM

It's been 20 days and no one can provide any input? Could the driver creator shed
any light on this, anything at all :-)?
Thanks

Options: ReplyQuote
Re: FujiXerox M225dw
Posted by: rickrich ()
Date: December 22, 2015 11:52AM

Do this:

$ cd foo2zjs

$ foo2hbpl2-wrapper -r600x600 -p1 -m1 -n1 testpage.ps > xxx

$ su
# usb_printerid /dev/usb/lp0
# cp xxx /dev/usb/lp0

What does that say?

Options: ReplyQuote
Re: FujiXerox M225dw
Posted by: sashka76 ()
Date: December 25, 2015 05:13AM

Hi, thank you for your reply!

I did what you said, except that I had to use lp1 instead of lp0. I get nothing in the cups logs (since I am going it directly to the printer port, I suppose). The printer display still lights up and says "receiving data" at first, but then it says "sleep" and nothing is printed. The actual cp command produces nothing on stdout or stderr.

Options: ReplyQuote
Re: FujiXerox M225dw
Posted by: rickrich ()
Date: December 25, 2015 06:41PM

I tried it with Windows/XP. Looks like it is PCL6. Not one of my things.
$ ll ~/testpage.prn 
-rwxr--r--. 1 rick rick 96011 Dec 25 13:46 /home/rick/testpage.prn

$ xod ~/testpage.prn  | head -100

Dump: /home/rick/testpage.prn

Offset:    0  1  2  3  4  5  6  7   8  9  a  b  c  d  e  f   0123456789abcdef

00000000: 1b 25 2d 31 32 33 34 35  58 40 50 4a 4c 20 0a 40 | .%-12345X@PJL .@ |
00000010: 50 4a 4c 20 53 45 54 20  52 45 50 52 49 4e 54 3d | PJL SET REPRINT= |
00000020: 4f 46 46 0a 40 50 4a 4c  20 53 45 54 20 48 4f 4c | OFF.@PJL SET HOL |
00000030: 44 3d 4f 46 46 0a 40 50  4a 4c 20 53 45 54 20 55 | D=OFF.@PJL SET U |
00000040: 53 45 52 4e 41 4d 45 3d  22 72 69 63 6b 22 0a 40 | SERNAME="rick".@ |
00000050: 50 4a 4c 20 53 45 54 20  4a 4f 42 4e 41 4d 45 3d | PJL SET JOBNAME= |
00000060: 22 74 65 73 74 70 61 67  65 2e 70 64 66 22 0a 40 | "testpage.pdf".@ |
00000070: 50 4a 4c 20 4a 4f 42 20  4e 41 4d 45 3d 22 74 65 | PJL JOB NAME="te |
00000080: 73 74 70 61 67 65 2e 70  64 66 22 0a 40 50 4a 4c | stpage.pdf".@PJL |
00000090: 20 50 52 49 4e 54 4c 4f  47 20 49 54 45 4d 20 3d |  PRINTLOG ITEM = |
000000a0: 20 31 2c 50 52 49 4e 54  45 52 0a 40 50 4a 4c 20 |  1,PRINTER.@PJL  |
000000b0: 50 52 49 4e 54 4c 4f 47  20 49 54 45 4d 20 3d 20 | PRINTLOG ITEM =  |
000000c0: 32 2c 46 72 69 2c 32 35  20 44 65 63 20 32 30 31 | 2,Fri,25 Dec 201 |
000000d0: 35 20 31 33 3a 34 36 3a  33 37 0a 40 50 4a 4c 20 | 5 13:46:37.@PJL  |
000000e0: 50 52 49 4e 54 4c 4f 47  20 49 54 45 4d 20 3d 20 | PRINTLOG ITEM =  |
000000f0: 33 2c 72 69 63 6b 0a 40  50 4a 4c 20 50 52 49 4e | 3,rick.@PJL PRIN |
00000100: 54 4c 4f 47 20 49 54 45  4d 20 3d 20 34 2c 52 49 | TLOG ITEM = 4,RI |
00000110: 43 4b 2d 56 42 0a 40 50  4a 4c 20 53 45 54 20 4a | CK-VB.@PJL SET J |
00000120: 4f 42 54 49 4d 45 20 3d  20 22 32 30 31 35 31 32 | OBTIME = "201512 |
00000130: 32 35 31 33 34 36 33 37  22 0a 40 50 4a 4c 20 53 | 25134637".@PJL S |
00000140: 45 54 20 53 54 52 49 4e  47 43 4f 44 45 53 45 54 | ET STRINGCODESET |
00000150: 3d 48 50 52 4f 4d 41 4e  38 0a 40 50 4a 4c 20 53 | =HPROMAN8.@PJL S |
00000160: 45 54 20 45 43 4f 4e 4f  4d 4f 44 45 3d 4f 46 46 | ET ECONOMODE=OFF |
00000170: 0a 40 50 4a 4c 20 53 45  54 20 4d 45 44 49 41 54 | .@PJL SET MEDIAT |
00000180: 59 50 45 3d 52 45 47 55  4c 41 52 0a 40 50 4a 4c | YPE=REGULAR.@PJL |
00000190: 20 53 45 54 20 4c 45 53  53 50 41 50 45 52 43 55 |  SET LESSPAPERCU |
000001a0: 52 4c 3d 4f 46 46 0a 40  50 4a 4c 20 53 45 54 20 | RL=OFF.@PJL SET  |
000001b0: 46 49 58 49 4e 54 45 4e  53 49 54 59 55 50 3d 4f | FIXINTENSITYUP=O |
000001c0: 46 46 0a 40 50 4a 4c 20  53 45 54 20 54 52 41 4e | FF.@PJL SET TRAN |
000001d0: 53 46 45 52 4c 45 56 45  4c 55 50 3d 4f 4e 0a 40 | SFERLEVELUP=ON.@ |
000001e0: 50 4a 4c 20 53 45 54 20  54 52 41 4e 53 46 45 52 | PJL SET TRANSFER |
000001f0: 4c 45 56 45 4c 3d 30 0a  40 50 4a 4c 20 53 45 54 | LEVEL=0.@PJL SET |
00000200: 20 52 45 53 4f 4c 55 54  49 4f 4e 3d 36 30 30 0a |  RESOLUTION=600. |
00000210: 40 50 4a 4c 20 53 45 54  20 48 51 4d 4d 4f 44 45 | @PJL SET HQMMODE |
00000220: 3d 4f 46 46 0a 40 50 4a  4c 20 45 4e 54 45 52 20 | =OFF.@PJL ENTER  |
00000230: 4c 41 4e 47 55 41 47 45  3d 50 43 4c 0a 1b 26 6e | LANGUAGE=PCL..&n |
00000240: 38 57 64 52 65 67 75 6c  61 72 1b 26 6c 37 48 1b | 8WdRegular.&l7H. |
00000250: 26 6c 30 53 1b 26 6c 31  58 1b 26 75 36 30 30 44 | &l0S.&l1X.&u600D |
00000260: 1b 2a 74 36 30 30 52 1b  26 6c 30 4f 1b 26 6c 32 | .*t600R.&l0O.&l2 |
00000270: 61 36 64 31 45 1b 26 6c  30 55 1b 26 6c 30 5a 1b | a6d1E.&l0U.&l0Z. |
00000280: 2a 70 30 58 1b 2a 70 30  59 1b 2a 76 31 6f 54 1b | *p0X.*p0Y.*v1oT. |
00000290: 2a 62 31 30 33 30 4d 1b  2a 62 31 33 30 77 00 80 | *b1030M.*b130w.. |
000002a0: ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff | ................ |
*
00000320: 31 33 30 77 00 80 ff ff  ff ff ff ff ff ff ff ff | 130w............ |

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.