HP LaserJet 1020 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
Printer problem on FC 16 [solved]
Posted by: raghy.rao ()
Date: May 16, 2012 10:27AM

Hello,

Here the Message I am getting after running system-config-printer

Thanks
Raghu

------------------------------------------------------------------------------------
(system-config-printer.py:9486): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:9486): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:9486): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
/usr/share/system-config-printer/system-config-printer.py:1977: GtkWarning: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.GH5REW': No such file or directory
gtk.main()
/usr/share/system-config-printer/system-config-printer.py:1977: GtkWarning: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
gtk.main()



Edited 1 time(s). Last edit at 05/17/2012 07:56AM by rickrich.

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: rickrich ()
Date: May 16, 2012 10:33AM

Did you do:

$ system-config-printer

as your login ID?

Works fine on FC16.

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: raghy.rao ()
Date: May 16, 2012 10:52AM

when , I do a system-config-printer , the printer gui pops up says connected to local host , printer dailog says host name , but no status . no document is printed

Thanks
Raghu

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: rickrich ()
Date: May 16, 2012 12:02PM

What is the printer? What is the connection (net or USB)?

system-config-printer -> Add Printer -> Select Device -> ...

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: raghy.rao ()
Date: May 16, 2012 12:39PM

printer is on usb, HP 1020

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: rickrich ()
Date: May 16, 2012 12:43PM

What does this say:
$ usb_printerid /dev/usb/lp0 
GET_DEVICE_ID string:
MFG:Hewlett-Packard;MDL:HP LaserJet 1020;CMD:ACL;CLS:PRINTER;DES:HP LaserJet 1020;FWVER:20050309;

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: raghy.rao ()
Date: May 16, 2012 10:04PM

here is the message , both on the user login and the su login
----------------------------------------------------------------
No such file or directory: can't open '/dev/usb/lp0'

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: rickrich ()
Date: May 17, 2012 02:04AM

Firmware is not getting loaded.

Do you do:

$ make
$ ./getweb 1020
# su
# make install
# make install-hotplug # IMPORTANT

And then power down and power up the printer?

URI should be usb:/dev/usb/lp0

$ usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
MFG:Hewlett-Packard;MDL:HP LaserJet 1020;CMD:ACL;CLS:PRINTER;DES:HP LaserJet 1020;FWVER:20050309;

Options: ReplyQuote
Re: Printer problem on FC 16
Posted by: raghy.rao ()
Date: May 17, 2012 02:40AM

Yes, thank you

Got it working now

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.