HP LaserJet 1020 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
Send the firmware to Dlink DPR 1061 print server [solved; no compat]
Posted by: ccy ()
Date: January 16, 2011 02:59AM

Hi,

I am trying to connect a Dlink DPR 1061 print server with HP Laser Jet 1020. As expected, this printer won't print from Linux workstation that attempt to print to the Dlink print server.

Is that any ways to send the printer firmware to printer via network so I may have chance to print.

Or is there anyways to allow me to print to HP Laser Jet 1020 connected to Dlink DPR1061 print server?



Edited 3 time(s). Last edit at 01/16/2011 09:32AM by rickrich.

Options: ReplyQuote
Re: Send the firmware to Dlink DPR 1061 print server
Posted by: rickrich ()
Date: January 16, 2011 06:37AM

$ lp -oraw /usr/share/foo2zjs/firmware/sihp1020.dl

Options: ReplyQuote
Re: Send the firmware to Dlink DPR 1061 print server
Posted by: ccy ()
Date: January 16, 2011 07:07AM

It seems impossible to send anything to the printer from DPR-1061 print server. The status of the printer (port 91000 shown in the web management is alwasy offline. I have tried using nc or netcat and it prompt connection refused for port 9100. Another port 9102 that connect to a dot matrix printer works fine.

Options: ReplyQuote
Re: Send the firmware to Dlink DPR 1061 print server
Posted by: rickrich ()
Date: January 16, 2011 09:31AM


Options: ReplyQuote
Re: Send the firmware to Dlink DPR 1061 print server
Posted by: ccy ()
Date: January 16, 2011 08:00PM

rickrich Wrote:
-------------------------------------------------------
> ftp://ftp.dlink.co.uk/dpr_products/dpr-1061/dpr-10
> 61_Printer_Lists_20080612.pdf
>
> No Laserjet 1020.

Check this: http://global.dlink.com.sg/site_support/PrinterList/printerlist_20100128.pdf

HP LaserJet 1020 works with DPR 1061

Options: ReplyQuote
Re: Send the firmware to Dlink DPR 1061 print server [solved; no compat]
Posted by: rickrich ()
Date: January 16, 2011 10:23PM

So, why are you asking me??? Take up with Dlink support, then.

Options: ReplyQuote


Sorry, you can't reply to this topic. It has been closed.
This forum powered by Phorum.