HP P2014 recognized sometimes [debian]
Posted by: ranamalo ()
Date: June 03, 2009 08:06PM

I have a P2014 plugged into a lenny box. I have compiled and installed the foo2zjs drivers. When I plug in the P2014 sometimes it recognizes it and sometimes it doesn't. When it the recognition is successful everything works fine, when the recognition is unsuccessful, I can see an HP entry in lsusb, but there is nothing in /dev/usb/ and the printer accepts jobs, but nothing gets printed. Below is the output from syslog for a successful recognition and an unsuccessful recognition:


Successful:

Jun 3 14:47:13 servidorivan kernel: [218490.678380] usb 5-4: new high speed USB device using ehci_hcd and address 6

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usb 5-4: configuration #1 chosen from 1 choice

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3917

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usb 5-4: New USB device found, idVendor=03f0, idProduct=3917

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usb 5-4: Product: HP LaserJet P2014

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usb 5-4: Manufacturer: Hewlett-Packard

Jun 3 14:47:13 servidorivan kernel: [218490.824185] usb 5-4: SerialNumber: LW14XHB




Unsuccessful:

Jun 3 15:07:02 servidorivan kernel: [219861.444984] usb 5-4: new high speed USB device using ehci_hcd and address 7

Jun 3 15:07:07 servidorivan kernel: [219867.220907] usb 5-4: unable to read config index 0 descriptor/start: -110

Jun 3 15:07:07 servidorivan kernel: [219867.220933] usb 5-4: chopping to 0 config(s)

Jun 3 15:07:12 servidorivan kernel: [219872.661088] usb 5-4: no configuration chosen from 0 choices

Jun 3 15:07:12 servidorivan kernel: [219872.661228] usb 5-4: New USB device found, idVendor=03f0, idProduct=3917

Jun 3 15:07:12 servidorivan kernel: [219872.661238] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Jun 3 15:07:12 servidorivan kernel: [219872.661243] usb 5-4: Product: HP LaserJet P2014

Jun 3 15:07:12 servidorivan kernel: [219872.661247] usb 5-4: Manufacturer: Hewlett-Packard

Jun 3 15:07:12 servidorivan kernel: [219872.661250] usb 5-4: SerialNumber: LW14XHB


Any help with making it successful 100% of the time would be very welcome.



Edited 1 time(s). Last edit at 06/03/2009 08:29PM by rickrich.

Re: HP P2014 recognized sometimes
Posted by: rickrich ()
Date: June 03, 2009 08:27PM

"unable to read config index 0 descriptor/start: -110"

Put it on a different USB controller or change the cables or put it on a POWERED hub.

Sorry, only registered users may post in this forum.
This forum powered by Phorum.