Oki C3300n, C3400n, C3530n MFP :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 05, 2014 07:17AM

Hi Rick was using the " foo2hiperc " driver in Ubuntu 12.04 server with Oki C3520 MFC printer and printed if only he had no problem .

I recently upgraded the server Ubuntu 14.04 and consequently also the printer driver and I could not get it to work properly.
From cups tells me that the job has been sent and printed correctly but it does not.

When I try to print to the Oki a message indicating that paper into the badeja (and already have media tray ) appears . If I press the start button a few segudos sending the print job is then printed otherwise not print.

I tried installing the driver version you had before but does not work . With this version does nothing is as if there is no communication with the printer.

Can you help ? Thank you

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 05, 2014 07:58AM

What does this say:

$ cd foo2zjs

$ foo2hiperc-wrapper testpage.ps > xxx.prn

$ ls -l xxx.prn
-rw-rw-r--. 1 rick rick 3994855 Dec 5 06:52 xxx.prn

$ nc 192.168.xxx.yyy 9100 < xxx.prn # Replace with c3520 mfc IP address!!!

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 05, 2014 11:06AM

$ ls -l xxx.prn
-rw-rw-r-- 1 jorquera jorquera 3994848 dic 5 17:01 xxx.prn

$ nc 10.32.196.169 9100 < xxx.prn

Nothing

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 05, 2014 01:18PM

No idea why it doesn't work for you. It works on Ubuntu 14.04 here. Did you follow all instructions on *my site*? Third party installs (i.e. from Ubuntu's repository) are *not supported*.

Maybe its your IP firewall?

$ telnet 192.168.1.13 9100 #replace IP address with your printer!
Trying 192.168.1.13...
Connected to 192.168.1.13.
Escape character is '^]'.
$

versus:

$ telnet 192.168.1.96 9100
Trying 192.168.1.96...
telnet: connect to address 192.168.1.96: Connection refused
$



Edited 2 time(s). Last edit at 12/05/2014 01:40PM by rickrich.

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 06, 2014 04:33AM

$telnet 10.32.196.169 9100
Trying 10.32.196.169...
Connected to 10.32.196.169.
Escape character is '^]'.

Is communicating with the printer but does not print unless you press the start button .

Leaves a message on the screen indicating that the paper into the tray.

I changed from cups to change settings tray "default " to " Trai 1" but does not print the same and single handedly the button .

From Windows you are printing fine, no problems .

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 06, 2014 04:34AM

What should command $ nc 10.32.196.169 9100 < xxx.prn?

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 06, 2014 07:22PM

What does this say:

# grep foo2hiperc /var/log/messages

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 09, 2014 03:59AM

$ grep foo2hiperc /var/log/messages

/var/log/messages: No existe el archivo o el directorio


$ nc 10.32.196.169 9100 < xxx.prn

The Oki a message indicating that paper into the badeja (and already have media tray ) appears . If I press the start button a few segudos sending the print job is then printed otherwise not print.

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 09, 2014 07:58AM

Sorry, Ubuntu moved the file. Do this:

$ grep foo2hiperc /var/log/syslog

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 09, 2014 08:03AM

$ grep foo2hiperc /var/log/syslog

There is no error

Cups does not give any error. I just do not directly printed. You have to press the start button .

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 09, 2014 07:00PM

I am assuming you use "letter" media. But, try this if you use A4 media:

$ cd foo2zjs

$ foo2hiperc-wrapper -pa4 testpage.ps > xxx.prn

$ nc 192.168.xxx.yyy 9100 < xxx.prn # Replace with c3520 mfc IP address!!!

Did it print?

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 10, 2014 03:41AM

I use the A4 format.

I tried what you say and feel the same. A message appears on the display indicating that the printer paper into the paper tray already has . As I hit the start button the test page is printed.

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 10, 2014 11:09AM

What does this say:

$ hipercdecode <xxx.prn

???

Please copy all of the data.

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 10, 2014 11:40AM

$ hipercdecode <xxx.prn
\033%-12345X@PJL
@PJL RDYMSG DISPLAY = "Unknown"
@PJL SET OKIJOBACCOUNTJOB USERID="Unknown" JOBNAME="Unknown"
@PJL SET OKIAUXJOBINFO DATA="DocumentName=Unknown"
@PJL SET OKIAUXJOBINFO DATA="ComputerName=gatoweb"
@PJL SET OKIAUXJOBINFO DATA="ReceptionTime=00:00:00 2014/12/10"
@PJL SET OKIAUTOTRAYSWITCH=ON
@PJL SET OKIPAPERSIZECHECK=ENABLE
@PJL SET RESOLUTION=600
@PJL SET PAPER=A4
@PJL SET OKITRAYSEQUENCE=PAPERFEEDTRAY
@PJL SET OKIPAPERFEED=TRAY1
@PJL SET OKIMEDIATYPE = PLAIN
@PJL SET LPARM:PCL OKIPRINTMARGIN=INCH1D6
@PJL SET COPIES=1
@PJL SET QTY=1
@PJL SET HIPERCEFFECTIVEBLOCKSIZE=4349920
@PJL ENTER LANGUAGE=HIPERC
RECTYPE 0 (len=52,0x34 cnt=1), Page 1
BLKNUM 0, nbie=1, pn=3 [black] uc=0,17, wid=4864 ud=0,0
BLKNUM 1 (len=20), uncompressed=1, bie:
DL = 48, D = 48, P = 49, - = 48, XY = 4864 x 6912
L0 = 256, MX = 0, MY = 0
Order = 0
Options = 0
1 stripes, 0 layers, 49 planes
RECTYPE 1 (len=155668,0x26014 cnt=1)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=2)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=3)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=4)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=5)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=6)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=7)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=8)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=9)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=10)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=11)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=12)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=13)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=14)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=15)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=16)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=17)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=18)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=19)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=20)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=21)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=22)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=23)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=24)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=25)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=26)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 1 (len=155668,0x26014 cnt=27)
BLKNUM 0 (len=4), plane=3, uc=0,0,0
BLKNUM 1 (len=155648), Data=00 00 00 00 00 00 00 00 00 00 00 ...
RECTYPE 255 (len=8,0x8 cnt=28)
\033%-12345X@PJL
@PJL EOJ NAME = "End "
\033%-12345X

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: rickrich ()
Date: December 10, 2014 12:54PM

Looks right. Probably something is wrong with your printer. Maybe the toner?

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 11, 2014 05:40AM

I do not get it. Since Windows printer prints fine without any problems.

The toner is correct.

With version 12.04 of Ubuntu Server also printed fine.

Now any print job remains to pending press the start button on the printer .

And as you say everything is correct in the driver .

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 11, 2014 06:04AM

The black toner is at 50% , I'll put a new one to try.

Options: ReplyQuote
Re: Oki c3520 mfc has stopped working
Posted by: jorquera ()
Date: December 11, 2014 06:06AM

In the forum there is a thread with a similar problem

http://foo2zjs.rkkda.com/forum/read.php?52,3008

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.