HP LaserJet P1505 / P1505n :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
HP P1505 doesn't want to print (OpenSUSE 10.3) [solved]
Posted by: Cavalera ()
Date: April 09, 2009 11:50PM

foo2zjs is installed, firmware (sihpP1505.dl) is placed into /usr/share/foo2xqx/firmware and loaded to printer.

Apr 11 01:30:36 linux-1cac kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3F17
/etc/hotplug/usb/hpljP1505: foo2zjs: loading HP LaserJet P1505 firmware /usr/share/foo2xqx/firmware/sihpP1505.dl to /dev/usb/lp0 ...
/etc/hotplug/usb/hpljP1505: foo2zjs: ... download successful.


But:

Apr 11 01:36:23 linux-1cac su: (to root) root on none
Apr 11 01:36:24 linux-1cac kernel: lp: driver loaded but no devices found
Apr 11 01:36:24 linux-1cac kernel: lp: driver loaded but no devices found


Device URI is usb:/dev/usb/lp0

CUPS web panel reports that "Printer not connected; will retry in 30 seconds..."
Connection test in Yast is passed (ok).



Edited 3 time(s). Last edit at 04/12/2009 07:53PM by rickrich.

Options: ReplyQuote
Re: HP P1505 doesn't want to print (OpenSUSE 10.3)
Posted by: rickrich ()
Date: April 10, 2009 05:19AM

# usb_printerid /dev/usb/lp0
What does that say???

Options: ReplyQuote
Re: HP P1505 doesn't want to print (OpenSUSE 10.3)
Posted by: Cavalera ()
Date: April 12, 2009 05:12PM

linux-1cac:~ # usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
MFG:Hewlett-Packard;MDL:HP LaserJet P1505;CMD:ACL;CLS:PRINTER;DES:HP LaserJet P1505;


Before sending a print job printer status is "Online", after sending - "Printer not connected; will retry in 30 seconds..."

Options: ReplyQuote
Re: HP P1505 doesn't want to print (OpenSUSE 10.3)
Posted by: rickrich ()
Date: April 12, 2009 07:00PM

Firmware is not getting loaded.

Did you do:

$ make
$ ./getweb P1505
$ su
# make install install-hotplug
Power down, then up the printer.
# usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
MFG:Hewlett-Packard;MDL:HP LaserJet P1505;CMD:ACL;CLS:PRINTER;DES:HP LaserJet P1505; FWVER: xxxxxxxxx
Read INSTALL:
HP LASERJET 1000/1005/1018/1020, P1005/P1006/P1007/P1008/P1505 NOTES

Options: ReplyQuote
Re: HP P1505 doesn't want to print (OpenSUSE 10.3)
Posted by: Cavalera ()
Date: April 12, 2009 07:20PM

Everything is ok now.

However, I had to change the recommended URI
/dev/usb/lp0
to its' defaults -
usb://HP/LaserJet%20P1505


Thanks a lot!

Options: ReplyQuote
Re: HP P1505 doesn't want to print (OpenSUSE 10.3)
Posted by: rickrich ()
Date: April 12, 2009 07:53PM

From INSTALL:
USB NOTES
---------
    If you are using the USB port, then the URI should be:
        usb://Samsung/CLP-310%20Series
        usb://Samsung/CLP-310%20Series
        usb://HP/Color%20LaserJet%20CP1215
        usb://HP/Color%20LaserJet%202600n
        usb://HP/LaserJet%201000
        usb://HP/LaserJet%201005
        usb://HP/LaserJet%201018
        usb://HP/LaserJet%201020
        usb://HP/LaserJet%20P1005
        usb://HP/LaserJet%20P1006
        usb://HP/LaserJet%20P1505
    OR
        usb:/dev/usb/lp0
        usb:/dev/usb/lp1

    Don't use hp://<whatever> because that is for hplib (a closed source
    driver).

Options: ReplyQuote
Re: HP P1505 doesn't want to print (OpenSUSE 10.3)
Posted by: Cavalera ()
Date: April 12, 2009 08:01PM

P.S.
There was a firmware problem, the one downloaded by getweb command is correct.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.