HP LaserJet P1006 / P1008 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
P1006 not working on Ubuntu 10.04 [USB problem]
Posted by: dwarder ()
Date: December 08, 2010 08:50AM

I've followed instructions on page http://foo2xqx.rkkda.com/
after connectiong my printer i see in /var/log/messages :
Quote
/var/log/messages
Dec 8 16:39:40 liza kernel: [10581.672103] usb 2-3: new high speed USB device using ehci_hcd and address 12
Dec 8 16:39:40 liza kernel: [10581.824180] usb 2-3: configuration #1 chosen from 1 choice
Dec 8 16:39:40 liza kernel: [10581.827093] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
Dec 8 16:39:40 liza logger: loading hp_laserjet_p1006 firmware 002 012
Dec 8 16:39:40 liza /etc/hotplug/usb/hpljP1006: foo2zjs: loading HP LaserJet P1006 firmware /usr/share/foo2xqx/firmware/sihpP1006.dl to /dev/usb/lp0 ...

and then i don't see "/etc/hotplug/usb/hpljP1006: foo2zjs: ... download successful." as i guess it should be

after that i run sudo system-config-printer
and add my printer there and send a test page to it, in /var/log/messages i then see:

Quote
/var/log/messages
Dec 8 16:47:56 liza kernel: [11077.429845] usb 2-3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
Dec 8 16:48:15 liza foo2xqx-wrapper: foo2xqx-wrapper -r1200x600 -p1 -T3 -m1 -s7 -d1 -n1
Dec 8 16:48:17 liza kernel: [11098.278294] usblp0: nonzero write bulk status received: -108
Dec 8 16:48:17 liza kernel: [11098.278648] usblp0: nonzero read bulk status received: -108
Dec 8 16:48:17 liza kernel: [11098.278975] usblp0: removed
Dec 8 16:48:17 liza /etc/hotplug/usb/hpljP1006: foo2zjs: ... download failed.

and on the console where i run sudo system-config-printer i see this:
Quote
sudo system-config-printer
dwarder@liza:~/fooo2/foo2zjs$ sudo system-config-printer
**** Incorrect IEEE 1284 Device ID: [u'drv:///hp/hpcups.drv/hp-laserjet_p1006.ppd', u'drv:///hpijs.drv/hp-laserjet_p1006-hpijs.ppd']
**** Actual ID is MFG:Hewlett-Packard;MDL:HP LaserJet P1006;
**** Please report a bug against the HPLIP component
Using foomatic:HP-LaserJet_P1006-foo2xqx.ppd (status: 0)
**** Incorrect IEEE 1284 Device ID: [u'drv:///hp/hpcups.drv/hp-laserjet_p1006.ppd', u'drv:///hpijs.drv/hp-laserjet_p1006-hpijs.ppd']
**** Actual ID is MFG:Hewlett-Packard;MDL:HP LaserJet P1006;
**** Please report a bug against the HPLIP component
Using foomatic:HP-LaserJet_P1006-foo2xqx.ppd (status: 0)



Edited 3 time(s). Last edit at 12/08/2010 12:08PM by rickrich.

Options: ReplyQuote
Re: P1006 not working on Ubuntu 10.04
Posted by: rickrich ()
Date: December 08, 2010 12:07PM

With all updates, printer P1005:
$ ssh abby-laptop
Linux abby-laptop 2.6.32-26-generic #48-Ubuntu SMP Wed Nov 24 09:00:03 UTC 2010 i686 GNU/Linux
Ubuntu 10.04.1 LTS

$ echo test | lpr
{printed fine}

$ cat /var/log/messages
Dec  8 10:46:19 abby-laptop kernel: [  147.855004] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
Dec  8 10:46:19 abby-laptop kernel: [  147.855087] usbcore: registered new interface driver usblp
Dec  8 10:46:19 abby-laptop /etc/hotplug/usb/hpljP1005: foo2zjs: loading HP LaserJet P1005 firmware /usr/share/foo2xqx/firmware/sihpP1005.dl to /dev/usb/lp0 ...
Dec  8 10:46:20 abby-laptop /etc/hotplug/usb/hpljP1005: foo2zjs: ... download successful.
Dec  8 10:47:47 abby-laptop foo2xqx-wrapper: foo2xqx-wrapper -r1200x600 -p1 -m1 -s7 -d1 -n1
Dec  8 10:47:48 abby-laptop foo2xqx-wrapper: gs -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=500000000  
Dec  8 10:47:48 abby-laptop foo2xqx-wrapper: foo2xqx -r1200x600 -g10200x6600 -p1 -m1 -n1 -d1 -s7  -u 177x84 -l 177x84   -T3

I think its a USB problem. Maybe if you get rid of hplip (apt-get remove hplib)?

Options: ReplyQuote
Re: P1006 not working on Ubuntu 10.04
Posted by: dwarder ()
Date: December 09, 2010 07:29PM

echo test | lpr
Quote
echo test | lpr
dwarder@liza:~$ echo test | lpr
lpr: Error - no default destination available.
> I think its a USB problem. Maybe if you get rid of hplip (apt-get remove hplib)?
got it removed, still it can't load firmware on my printer :(
tried 3 different usb cables, i guess i'd better buy a new printer

Options: ReplyQuote
Re: P1006 not working on Ubuntu 10.04 [USB problem]
Posted by: rickrich ()
Date: December 10, 2010 04:01PM

Please:
$ sudo rm /etc/udev/rules.d/86-hpmud*
Then, reboot your computer and follow the instructions for foo2zjs.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.