HP LaserJet P1006 / P1008 :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
HP 1006 no activity [solved]
Posted by: elmo23x ()
Date: August 08, 2009 05:09AM

Hello,

I was using this driver with my HP 1006 since a month ago, but suddenly it stopped working. No pages were coming out.

So I reinstalled the driver and still the same problem there is no activity. When I run "sudo make test" I get this and no activity from printer:

#
# Tests will pass only if you are using ghostscript-7.05-24.7
# or ghostscript-8.62 (gs.foo)
#
# Monochrome test page for Minolta 2200/2300 DL
PATH=.:$PATH time -p foo2zjs-wrapper testpage.ps > testpage.zm
#
# Color test page for Minolta 2200/2300 DL
PATH=.:$PATH time -p foo2zjs-wrapper -c -C10 testpage.ps > testpage.zc10
PATH=.:$PATH time -p foo2zjs-wrapper -c -C1 testpage.ps > testpage.zc1
PATH=.:$PATH time -p foo2zjs-wrapper -c -C2 testpage.ps > testpage.zc2
PATH=.:$PATH time -p foo2zjs-wrapper -c -C3 testpage.ps > testpage.zc3
#
# Monochrome test page for HP LJ1000
PATH=.:$PATH time -p foo2zjs-wrapper -r600x600 -P testpage.ps >lj1000.zm
#
# Monochrome test page for HP LJ1020
PATH=.:$PATH time -p foo2zjs-wrapper -r600x600 -P -z1 \
	    testpage.ps >lj1020.zm
#
# Monochrome test page for HP 2600n (1-bit)
PATH=.:$PATH time -p foo2hp2600-wrapper testpage.ps > lj2600.zm1
#
# Color test page for HP 2600n (1-bit)
PATH=.:$PATH time -p foo2hp2600-wrapper -c testpage.ps > lj2600.zc1
*** Test failure, got 4c3854f606ac5c4b488af5cba4437ed0  lj2600.zc1
-rw-r--r-- 1 root root 131428 2009-08-08 11:06 lj2600.zc1

I am running kubuntu 9.04 and the ubuntu foo2zjs package was removed before installing manually this driver.

On windows the printer is running without problems.
Do you have any ideas of what can I be doing wrong?

Thank you.



Edited 1 time(s). Last edit at 03/20/2010 01:09PM by rickrich.

Options: ReplyQuote
Re: HP 1006 no activity
Posted by: rickrich ()
Date: August 08, 2009 06:35AM

# Tests will pass only if you are using ghostscript-7.05-24.7
# or ghostscript-8.62 (gs.foo)

Obviously, gs is not correct!

Do this:

$ usb_printerid /dev/usb/lp0

What does that say?

What is the URI?

Options: ReplyQuote
Re: HP 1006 no activity
Posted by: rickrich ()
Date: August 08, 2009 10:42AM

Works good here using HP 1020. Note the URI!!!


Options: ReplyQuote


Sorry, you can't reply to this topic. It has been closed.
This forum powered by Phorum.