Hi, i was trying to get my printer working, it was working very well, nothing to say... really good.
a recent updates kill the good support... now it doesn't work anymore, i'm using Fedora 12, Ghostscript 8.71 and your foo2xqx... when i send a file to print just i get the green LED of my printer to a blinking Green LED... but doesn't print.
[maximi89@gateway foo2zjs]$ gs -sPAPERSIZE=a4 -g9920x7016 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=500000000
GPL Ghostscript 8.71 (2010-02-10)
Copyright (C) 2010 Artifex Software, Inc. All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Fontmap entry for Fontmap.local ends prematurely! Giving up.
[maximi89@gateway foo2zjs]$ foo2xqx -r1200x600 -g9920x7016 -p9 -m1 -n1 -d1 -s7 -u 176x84 -l 176x84 -T3
@PJL SET JAMRECOVERY=OFF
@PJL SET DENSITY=3
@PJL SET ECONOMODE=OFF
@PJL SET RET=MEDIUM
@PJL INFO STATUS
@PJL USTATUS DEVICE = ON
@PJL USTATUS JOB = ON
@PJL USTATUS PAGE = ON
@PJL USTATUS TIMED = 30
@PJL SET JOBATTR="JobAttr4=20100912000403" %-12345X,XQX
Not a pbm file!
Thanks in advance!
Edited 2 time(s). Last edit at 09/13/2010 02:32AM by rickrich.
$ wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz
$ tar zxf foo2zjs.tar.gz
$ cd foo2zjs
# make uninstall
$ ./getweb p1005 #IMPORTANT
# make install
# make install-hotplug # IMPORTANT
$ usb_printerid /dev/usb/lp0
What does this say?
Edited 1 time(s). Last edit at 09/12/2010 01:24PM by rickrich.
Correctly! it's works now... but the question is, why it doesn't works before...
i do a manual firmware load... but it doesn't works, then i try with reinstalling foo2xqx, it doesn't works... probably hotplug was the guilty...
now it's working... but i going to do more tests, i hope it fail again! :D
Thanks for your time Rickrich!
i will in contact if it fail suspending my computer :D