I'm trying to run a HP Laserjet P1005 with p910nd printserver on an Asus WL-500g with openwrt. I successfully did that with a Laserjet 1020 on the same machine before.
I'm using the hotplugd to transmitt the firmware to the printer, but that doesn't seem to work. My script tries to write the firmware with "cat $P1005FIRMWARE > /dev/usb/lp0" but that doesn't seem to work.
When using ./usb_printerid /dev/usb/lp0 from http://oleg.wl500g.info/hplj/
MFG:Hewlett-Packard;MDL:HP LaserJet P1005;CMD:ACL;CLS:PRINTER;DES:HP LaserJet P1005;
So it seems, that the firmware isn't transmitted successfully. It did work before with the 1020 printer, so I thought it should with the P1005.
Can you help me?
Edited 2 time(s). Last edit at 03/03/2010 01:38PM by rickrich.