Konica Minolta magicolor 2530 DL :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
no printing State Job stopped [CUPS problem]
Posted by: gm ()
Date: November 28, 2007 08:01PM

hello
I'm trying to get a network printer going using the foo2zjs driver. I have followed instructions as far as I know, (It took a few tries) but when I print nothing happens. The printer q for the magicolor-2530-dl lists the print job but after a few moments lists the print job as stopped. OS is Ubuntu 6.06. For properties, connection I selected network printer, HP Jetdirect, host is IP address and port is 9100. If I put the IP address in my brouser it sees the printer on the network. Any suggestions as to what to do, or what to redo would be appreciated.
thanks



Edited 1 time(s). Last edit at 11/30/2007 10:20PM by rickrich.

Options: ReplyQuote
Re: no printing State Job stopped
Posted by: rickrich ()
Date: November 28, 2007 10:32PM

Try this:
$ cd foo2zjs
$ foo2lava-wrapper testpage.ps >xxx
$ nc 192.168.X.Y 9100 <xxx
Did that work???

If yes, then its a CUPS problem. Check with Ubuntu.

If no, then report back what happened.

Work fine here on a 2530DL with Fedora Core 5/6/7 and 8. Also, Redhat 7.2 and 8.0.

Options: ReplyQuote
Re: no printing State Job stopped
Posted by: gm ()
Date: November 30, 2007 07:52PM

There is life !!!!
It is most satisfying when hardware actually comes to life, The istructions caused the printing of RED Hat Printconf.... Test Page
Something is working, thanks, errr... what next...

Options: ReplyQuote
Re: no printing State Job stopped
Posted by: rickrich ()
Date: November 30, 2007 08:37PM

If yes, then its a CUPS problem. Check with Ubuntu. Can't help.

Options: ReplyQuote
Re: no printing State Job stopped [CUPS problem]
Posted by: gm ()
Date: December 01, 2007 10:47AM

Thanks
gm

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.