HP LaserJet Pro M12a / M12w :  foo2zjs - foo2hp - foo2xqx - foo2lava - foo2qpdl - foo2oak
Support for linux printer drivers
The fastest message board... ever.
 
Linux Mint 19 HP Laserjet Pro M12a Print error [solved]
Posted by: rando ()
Date: September 19, 2018 01:03PM

Hi,

Print the test page
Sending Data to Printer
Print error there was a problem while processing the document
Printer status: Inactive Filter failed

HP LaserJet Pro M12a Foomatic/foo2zjs-z2 (recommended)
usb://HP/LaserJet%20Pro%20M12a?serial=0000000005P212DCPR1a

access_log
localhost - - [19/Sep/2018:18:55:00 +0200] "POST / HTTP/1.1" 200 349 Create-Printer-Subscriptions successful-ok
localhost - - [19/Sep/2018:18:55:00 +0200] "POST / HTTP/1.1" 200 176 Create-Printer-Subscriptions successful-ok
localhost - - [19/Sep/2018:18:55:06 +0200] "POST / HTTP/1.1" 401 75 CUPS-Get-Devices successful-ok
localhost - root [19/Sep/2018:18:55:06 +0200] "POST / HTTP/1.1" 200 2100 CUPS-Get-Devices -
localhost - - [19/Sep/2018:18:55:10 +0200] "GET /admin/conf/cupsd.conf HTTP/1.1" 401 0 - -
localhost - root [19/Sep/2018:18:55:10 +0200] "GET /admin/conf/cupsd.conf HTTP/1.1" 200 4731 - -
localhost - root [19/Sep/2018:18:55:20 +0200] "GET /admin/conf/cupsd.conf HTTP/1.1" 304 0 - -
localhost - root [19/Sep/2018:18:55:20 +0200] "GET /admin/conf/cupsd.conf HTTP/1.1" 200 4731 - -
localhost - root [19/Sep/2018:18:55:20 +0200] "GET /admin/conf/cupsd.conf HTTP/1.1" 304 0 - -
localhost - root [19/Sep/2018:18:55:20 +0200] "PUT /admin/conf/cupsd.conf HTTP/1.1" 201 4746 - -
localhost - - [19/Sep/2018:18:55:38 +0200] "POST / HTTP/1.1" 200 349 Create-Printer-Subscriptions successful-ok
localhost - - [19/Sep/2018:18:55:38 +0200] "POST / HTTP/1.1" 200 176 Create-Printer-Subscriptions successful-ok

error_log
I [19/Sep/2018:18:54:43 +0200] Saving subscriptions.conf...
D [19/Sep/2018:18:54:43 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [19/Sep/2018:18:54:43 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I [19/Sep/2018:18:54:43 +0200] Saving job.cache...
D [19/Sep/2018:18:54:43 +0200] cupsdStopSelect()
E [19/Sep/2018:18:55:00 +0200] Unknown directive JobPrivateAccess on line 123 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:00 +0200] Unknown directive JobPrivateValues on line 124 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:00 +0200] Unknown directive SubscriptionPrivateAccess on line 125 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:00 +0200] Unknown directive SubscriptionPrivateValues on line 126 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:06 +0200] [Client 8] Local authentication certificate not found.
E [19/Sep/2018:18:55:07 +0200] [cups-deviced] PID 3064 (gutenprint52+usb) stopped with status 1!
E [19/Sep/2018:18:55:20 +0200] Scheduler shutting down due to program error.
I [19/Sep/2018:18:55:38 +0200] Listening to /run/cups/cups.sock (Domain)
W [19/Sep/2018:18:55:38 +0200] Duplicate listen address "/run/cups/cups.sock" ignored.
E [19/Sep/2018:18:55:38 +0200] Unknown directive JobPrivateAccess on line 123 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:38 +0200] Unknown directive JobPrivateValues on line 124 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:38 +0200] Unknown directive SubscriptionPrivateAccess on line 125 of /etc/cups/cupsd.conf.
E [19/Sep/2018:18:55:38 +0200] Unknown directive SubscriptionPrivateValues on line 126 of /etc/cups/cupsd.conf.
I [19/Sep/2018:18:55:38 +0200] Remote access is disabled.
D [19/Sep/2018:18:55:38 +0200] Added auto ServerAlias rando-nuc
I [19/Sep/2018:18:55:38 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
D [19/Sep/2018:18:55:38 +0200] Using keychain "/etc/cups/ssl" for server name "rando-nuc".
I [19/Sep/2018:18:55:38 +0200] Using default TempDir of /var/spool/cups/tmp...
I [19/Sep/2018:18:55:38 +0200] Configured for up to 100 clients.
I [19/Sep/2018:18:55:38 +0200] Allowing up to 100 client connections per host.
I [19/Sep/2018:18:55:38 +0200] Using policy "default" as the default.
I [19/Sep/2018:18:55:38 +0200] Full reload is required.
I [19/Sep/2018:18:55:38 +0200] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [19/Sep/2018:18:55:38 +0200] Loading printer Deskjet-1510-series...
D [19/Sep/2018:18:55:38 +0200] load_ppd: Loading /var/cache/cups/Deskjet-1510-series.data...
D [19/Sep/2018:18:55:38 +0200] cupsdRegisterPrinter(p=0x55d69c4a2b20(Deskjet-1510-series))
D [19/Sep/2018:18:55:38 +0200] Loading printer HP-LaserJet-Pro-M12a...
D [19/Sep/2018:18:55:38 +0200] load_ppd: Loading /var/cache/cups/HP-LaserJet-Pro-M12a.data...
D [19/Sep/2018:18:55:38 +0200] cupsdRegisterPrinter(p=0x55d69c52e520(HP-LaserJet-Pro-M12a))
I [19/Sep/2018:18:55:38 +0200] Loading job cache file "/var/cache/cups/job.cache"...
D [19/Sep/2018:18:55:38 +0200] [Job 1] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 1] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 2] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 2] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 3] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 3] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 9] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 9] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 16] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 17] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 25] Loading from cache...
D [19/Sep/2018:18:55:38 +0200] [Job 25] Loading attributes...
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
I [19/Sep/2018:18:55:38 +0200] Full reload complete.
D [19/Sep/2018:18:55:38 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [19/Sep/2018:18:55:38 +0200] Cleaning out old files in "/var/spool/cups/tmp".
D [19/Sep/2018:18:55:38 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp/.hplip", pattern="(null)")
I [19/Sep/2018:18:55:38 +0200] Cleaning out old files in "/var/spool/cups/tmp/.hplip".
D [19/Sep/2018:18:55:38 +0200] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [19/Sep/2018:18:55:38 +0200] Cleaning out old files in "/var/cache/cups".
D [19/Sep/2018:18:55:38 +0200] service_checkin: pid=3133
D [19/Sep/2018:18:55:38 +0200] service_checkin: 1 listeners.
D [19/Sep/2018:18:55:38 +0200] service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D [19/Sep/2018:18:55:38 +0200] service_add_listener: Matched existing listener #1 to /run/cups/cups.sock.
D [19/Sep/2018:18:55:38 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [19/Sep/2018:18:55:38 +0200] Calling FindDeviceById(cups-Deskjet-1510-series)
D [19/Sep/2018:18:55:38 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Deskjet-1510-series\' does not exist
D [19/Sep/2018:18:55:38 +0200] Using profile ID "Deskjet-1510-series-Gray..".
D [19/Sep/2018:18:55:38 +0200] Calling CreateProfile(Deskjet-1510-series-Gray..,temp)
D [19/Sep/2018:18:55:38 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Deskjet_1510_series_Gray__".
D [19/Sep/2018:18:55:38 +0200] Using profile ID "Deskjet-1510-series-RGB..".
D [19/Sep/2018:18:55:38 +0200] Calling CreateProfile(Deskjet-1510-series-RGB..,temp)
D [19/Sep/2018:18:55:38 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Deskjet_1510_series_RGB__".
I [19/Sep/2018:18:55:38 +0200] Registering ICC color profiles for "Deskjet-1510-series".
D [19/Sep/2018:18:55:38 +0200] Calling CreateDevice(cups-Deskjet-1510-series,temp)
D [19/Sep/2018:18:55:38 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_Deskjet_1510_series".
D [19/Sep/2018:18:55:38 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Deskjet_1510_series:AddProfile(/org/freedesktop/ColorManager/profiles/Deskjet_1510_series_Gray__) [soft]
D [19/Sep/2018:18:55:38 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Deskjet_1510_series:AddProfile(/org/freedesktop/ColorManager/profiles/Deskjet_1510_series_RGB__) [soft]
D [19/Sep/2018:18:55:38 +0200] Calling FindDeviceById(cups-HP-LaserJet-Pro-M12a)
D [19/Sep/2018:18:55:38 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-HP-LaserJet-Pro-M12a\' does not exist
D [19/Sep/2018:18:55:38 +0200] Using profile ID "HP-LaserJet-Pro-M12a-Gray..".
D [19/Sep/2018:18:55:38 +0200] Calling CreateProfile(HP-LaserJet-Pro-M12a-Gray..,temp)
D [19/Sep/2018:18:55:38 +0200] Created profile "/org/freedesktop/ColorManager/profiles/HP_LaserJet_Pro_M12a_Gray__".
I [19/Sep/2018:18:55:38 +0200] Registering ICC color profiles for "HP-LaserJet-Pro-M12a".
D [19/Sep/2018:18:55:38 +0200] Calling CreateDevice(cups-HP-LaserJet-Pro-M12a,temp)
D [19/Sep/2018:18:55:38 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_HP_LaserJet_Pro_M12a".
D [19/Sep/2018:18:55:38 +0200] Calling /org/freedesktop/ColorManager/devices/cups_HP_LaserJet_Pro_M12a:AddProfile(/org/freedesktop/ColorManager/profiles/HP_LaserJet_Pro_M12a_Gray__) [soft]
I [19/Sep/2018:18:55:38 +0200] Listening to /run/cups/cups.sock on fd 3...
I [19/Sep/2018:18:55:38 +0200] Resuming new connection processing...
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [19/Sep/2018:18:55:38 +0200] cupsdAddCert: Adding certificate for PID 0
D [19/Sep/2018:18:55:38 +0200] Notifier dbus started - PID = 3138
D [19/Sep/2018:18:55:38 +0200] Notifier dbus started - PID = 3139
D [19/Sep/2018:18:55:38 +0200] Notifier dbus started - PID = 3140
D [19/Sep/2018:18:55:38 +0200] cupsdMarkDirty(----S)
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 1] Server address is "/run/cups/cups.sock".
D [19/Sep/2018:18:55:38 +0200] [Client 1] Accepted from localhost (Domain)
D [19/Sep/2018:18:55:38 +0200] [Client 1] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] Report: clients=1
D [19/Sep/2018:18:55:38 +0200] Report: jobs=11
D [19/Sep/2018:18:55:38 +0200] Report: jobs-active=1
D [19/Sep/2018:18:55:38 +0200] Report: printers=2
D [19/Sep/2018:18:55:38 +0200] Report: stringpool-string-count=18614
D [19/Sep/2018:18:55:38 +0200] Report: stringpool-alloc-bytes=13040
D [19/Sep/2018:18:55:38 +0200] Report: stringpool-total-bytes=338456
D [19/Sep/2018:18:55:38 +0200] [Client 1] POST / HTTP/1.1
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 1] Read: status=200, state=6
D [19/Sep/2018:18:55:38 +0200] [Client 1] No authentication data provided.
D [19/Sep/2018:18:55:38 +0200] [Client 1] 2.0 Create-Printer-Subscriptions 1
D [19/Sep/2018:18:55:38 +0200] Create-Printer-Subscriptions /
D [19/Sep/2018:18:55:38 +0200] create_subscriptions(con=0x55d69c66be50(1), uri="/")
D [19/Sep/2018:18:55:38 +0200] pullmethod="ippget"
D [19/Sep/2018:18:55:38 +0200] notify-lease-duration=86400
D [19/Sep/2018:18:55:38 +0200] notify-time-interval=60
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [19/Sep/2018:18:55:38 +0200] Added subscription #683 for server.
D [19/Sep/2018:18:55:38 +0200] cupsdMarkDirty(----S)
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D [19/Sep/2018:18:55:38 +0200] [Client 1] Content-Length: 107
D [19/Sep/2018:18:55:38 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:38 +0200] [Client 1] con->http=0x55d69c67bae0
D [19/Sep/2018:18:55:38 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55d69c65ce40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:38 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:38 +0200] [Client 1] bytes=0, http_state=0, data_remaining=107
D [19/Sep/2018:18:55:38 +0200] [Client 1] Flushing write buffer.
D [19/Sep/2018:18:55:38 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:38 +0200] [Client 1] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 2] Server address is "/run/cups/cups.sock".
D [19/Sep/2018:18:55:38 +0200] [Client 2] Accepted from localhost (Domain)
D [19/Sep/2018:18:55:38 +0200] [Client 2] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] [Client 2] POST / HTTP/1.1
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 2] Read: status=200, state=6
D [19/Sep/2018:18:55:38 +0200] [Client 2] No authentication data provided.
D [19/Sep/2018:18:55:38 +0200] [Client 2] 2.0 CUPS-Get-Printers 2
D [19/Sep/2018:18:55:38 +0200] CUPS-Get-Printers
D [19/Sep/2018:18:55:38 +0200] [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [19/Sep/2018:18:55:38 +0200] [Client 2] Content-Length: 2597
D [19/Sep/2018:18:55:38 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:38 +0200] [Client 2] con->http=0x55d69c684bc0
D [19/Sep/2018:18:55:38 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2597, response=0x55d69c6676c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:38 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:38 +0200] [Client 2] bytes=0, http_state=0, data_remaining=2597
D [19/Sep/2018:18:55:38 +0200] [Client 2] Flushing write buffer.
D [19/Sep/2018:18:55:38 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:38 +0200] [Client 2] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 2] POST / HTTP/1.1
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 2] Read: status=200, state=6
D [19/Sep/2018:18:55:38 +0200] [Client 2] No authentication data provided.
D [19/Sep/2018:18:55:38 +0200] [Client 2] 2.0 CUPS-Get-Default 3
D [19/Sep/2018:18:55:38 +0200] CUPS-Get-Default
D [19/Sep/2018:18:55:38 +0200] [Client 2] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [19/Sep/2018:18:55:38 +0200] [Client 2] Content-Length: 10009
D [19/Sep/2018:18:55:38 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:38 +0200] [Client 2] con->http=0x55d69c684bc0
D [19/Sep/2018:18:55:38 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10009, response=0x55d69c665be0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:38 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:38 +0200] [Client 2] bytes=0, http_state=0, data_remaining=10009
D [19/Sep/2018:18:55:38 +0200] [Client 2] Flushing write buffer.
D [19/Sep/2018:18:55:38 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:38 +0200] [Client 2] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Notifier] state=3
D [19/Sep/2018:18:55:38 +0200] [Notifier] Connected to D-BUS
D [19/Sep/2018:18:55:38 +0200] [Notifier] ServerStarted
D [19/Sep/2018:18:55:38 +0200] [Notifier] state=3
D [19/Sep/2018:18:55:38 +0200] [Notifier] state=3
D [19/Sep/2018:18:55:38 +0200] [Client 1] POST / HTTP/1.1
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 1] Read: status=200, state=6
D [19/Sep/2018:18:55:38 +0200] [Client 1] No authentication data provided.
D [19/Sep/2018:18:55:38 +0200] [Client 1] 2.0 CUPS-Get-Default 4
D [19/Sep/2018:18:55:38 +0200] CUPS-Get-Default
D [19/Sep/2018:18:55:38 +0200] [Client 1] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [19/Sep/2018:18:55:38 +0200] [Client 1] Content-Length: 10009
D [19/Sep/2018:18:55:38 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:38 +0200] [Client 1] con->http=0x55d69c67bae0
D [19/Sep/2018:18:55:38 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10009, response=0x55d69c664be0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:38 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:38 +0200] [Client 1] bytes=0, http_state=0, data_remaining=10009
D [19/Sep/2018:18:55:38 +0200] [Client 1] Flushing write buffer.
D [19/Sep/2018:18:55:38 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:38 +0200] [Client 1] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Notifier] Connected to D-BUS
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 3] Server address is "/run/cups/cups.sock".
D [19/Sep/2018:18:55:38 +0200] [Client 3] Accepted from localhost (Domain)
D [19/Sep/2018:18:55:38 +0200] [Client 3] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] [Client 3] POST / HTTP/1.1
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 3] Read: status=200, state=6
D [19/Sep/2018:18:55:38 +0200] [Client 3] No authentication data provided.
D [19/Sep/2018:18:55:38 +0200] [Client 3] 2.0 Get-Notifications 317
D [19/Sep/2018:18:55:38 +0200] Get-Notifications /printers/
D [19/Sep/2018:18:55:38 +0200] cupsdIsAuthorized: requesting-user-name="rando"
D [19/Sep/2018:18:55:38 +0200] [Client 3] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [19/Sep/2018:18:55:38 +0200] [Client 3] Content-Length: 127
D [19/Sep/2018:18:55:38 +0200] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:38 +0200] [Client 3] con->http=0x55d69c687dd0
D [19/Sep/2018:18:55:38 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x55d69c6683b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:38 +0200] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:38 +0200] [Client 3] bytes=0, http_state=0, data_remaining=127
D [19/Sep/2018:18:55:38 +0200] [Client 3] Flushing write buffer.
D [19/Sep/2018:18:55:38 +0200] [Client 3] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:38 +0200] [Client 3] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Notifier] Connected to D-BUS
D [19/Sep/2018:18:55:38 +0200] [Client 1] POST / HTTP/1.1
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 1] Read: status=200, state=6
D [19/Sep/2018:18:55:38 +0200] [Client 1] No authentication data provided.
D [19/Sep/2018:18:55:38 +0200] [Client 1] 2.0 Create-Printer-Subscriptions 5
D [19/Sep/2018:18:55:38 +0200] Create-Printer-Subscriptions /
D [19/Sep/2018:18:55:38 +0200] create_subscriptions(con=0x55d69c66be50(1), uri="/")
D [19/Sep/2018:18:55:38 +0200] recipient="dbus://"
D [19/Sep/2018:18:55:38 +0200] notify-lease-duration=86400
D [19/Sep/2018:18:55:38 +0200] notify-time-interval=0
D [19/Sep/2018:18:55:38 +0200] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [19/Sep/2018:18:55:38 +0200] Added subscription #684 for server.
D [19/Sep/2018:18:55:38 +0200] cupsdMarkDirty(----S)
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:38 +0200] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D [19/Sep/2018:18:55:38 +0200] [Client 1] Content-Length: 107
D [19/Sep/2018:18:55:38 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:38 +0200] [Client 1] con->http=0x55d69c67bae0
D [19/Sep/2018:18:55:38 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55d69c66d340(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:38 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:38 +0200] [Client 1] bytes=0, http_state=0, data_remaining=107
D [19/Sep/2018:18:55:38 +0200] [Client 1] Flushing write buffer.
D [19/Sep/2018:18:55:38 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:38 +0200] [Client 1] Waiting for request.
D [19/Sep/2018:18:55:38 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [19/Sep/2018:18:55:39 +0200] Expiring subscriptions...
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:47 +0200] [Client 4] Server address is "/run/cups/cups.sock".
D [19/Sep/2018:18:55:47 +0200] [Client 4] Accepted from localhost (Domain)
D [19/Sep/2018:18:55:47 +0200] [Client 4] Waiting for request.
I [19/Sep/2018:18:55:47 +0200] Expiring subscriptions...
D [19/Sep/2018:18:55:47 +0200] [Client 4] POST / HTTP/1.1
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Client 4] Read: status=200, state=6
D [19/Sep/2018:18:55:47 +0200] [Client 4] No authentication data provided.
D [19/Sep/2018:18:55:47 +0200] [Client 4] 2.0 Get-Jobs 163
D [19/Sep/2018:18:55:47 +0200] Get-Jobs ipp://localhost/printers/
D [19/Sep/2018:18:55:47 +0200] [Client 4] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [19/Sep/2018:18:55:47 +0200] [Client 4] Content-Length: 174
D [19/Sep/2018:18:55:47 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:47 +0200] [Client 4] con->http=0x55d69c68afe0
D [19/Sep/2018:18:55:47 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=174, response=0x55d69c667200(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:47 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:47 +0200] [Client 4] bytes=0, http_state=0, data_remaining=174
D [19/Sep/2018:18:55:47 +0200] [Client 4] Flushing write buffer.
D [19/Sep/2018:18:55:47 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:47 +0200] [Client 4] Waiting for request.
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Client 4] POST / HTTP/1.1
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Sep/2018:18:55:47 +0200] [Client 4] Read: status=200, state=6
D [19/Sep/2018:18:55:47 +0200] [Client 4] No authentication data provided.
D [19/Sep/2018:18:55:47 +0200] [Client 4] 2.0 Get-Jobs 164
D [19/Sep/2018:18:55:47 +0200] Get-Jobs ipp://localhost/printers/
I [19/Sep/2018:18:55:47 +0200] [Client 4] Limiting Get-Jobs response to 500 jobs.
D [19/Sep/2018:18:55:47 +0200] [Job 17] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 16] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 9] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 9] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 3] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 3] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 2] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 2] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 1] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Job 1] Loading attributes...
D [19/Sep/2018:18:55:47 +0200] [Client 4] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [19/Sep/2018:18:55:47 +0200] [Client 4] Content-Length: 1069
D [19/Sep/2018:18:55:47 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:55:47 +0200] [Job 1] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 1] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 2] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 2] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 3] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 3] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 9] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 9] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 16] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Job 17] Removing document files.
D [19/Sep/2018:18:55:47 +0200] cupsdMarkDirty(---J-)
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Sep/2018:18:55:47 +0200] [Client 4] con->http=0x55d69c68afe0
D [19/Sep/2018:18:55:47 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1069, response=0x55d69c673d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:55:47 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:55:47 +0200] [Client 4] bytes=0, http_state=0, data_remaining=1069
D [19/Sep/2018:18:55:47 +0200] [Client 4] Flushing write buffer.
D [19/Sep/2018:18:55:47 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:55:47 +0200] [Client 4] Waiting for request.
D [19/Sep/2018:18:55:47 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [19/Sep/2018:18:55:48 +0200] Expiring subscriptions...
I [19/Sep/2018:18:56:09 +0200] Saving job.cache...
I [19/Sep/2018:18:56:09 +0200] Saving subscriptions.conf...
D [19/Sep/2018:18:56:09 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [19/Sep/2018:18:56:09 +0200] Expiring subscriptions...
D [19/Sep/2018:18:56:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [19/Sep/2018:18:56:51 +0200] [Client 5] Server address is "/run/cups/cups.sock".
D [19/Sep/2018:18:56:51 +0200] [Client 5] Accepted from localhost (Domain)
D [19/Sep/2018:18:56:51 +0200] [Client 5] Waiting for request.
I [19/Sep/2018:18:56:51 +0200] Expiring subscriptions...
D [19/Sep/2018:18:56:51 +0200] [Job 1] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 1] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 2] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 2] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 3] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 3] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 9] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 9] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 16] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 17] Unloading...
D [19/Sep/2018:18:56:51 +0200] [Job 25] Unloading...
D [19/Sep/2018:18:56:51 +0200] Report: clients=5
D [19/Sep/2018:18:56:51 +0200] Report: jobs=11
D [19/Sep/2018:18:56:51 +0200] Report: jobs-active=1
D [19/Sep/2018:18:56:51 +0200] Report: printers=2
D [19/Sep/2018:18:56:51 +0200] Report: stringpool-string-count=18579
D [19/Sep/2018:18:56:51 +0200] Report: stringpool-alloc-bytes=11976
D [19/Sep/2018:18:56:51 +0200] Report: stringpool-total-bytes=337688
D [19/Sep/2018:18:56:51 +0200] [Client 5] POST / HTTP/1.1
D [19/Sep/2018:18:56:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [19/Sep/2018:18:56:51 +0200] [Client 5] Read: status=200, state=6
D [19/Sep/2018:18:56:51 +0200] [Client 5] No authentication data provided.
D [19/Sep/2018:18:56:51 +0200] [Client 5] 2.0 Get-Printer-Attributes 165
D [19/Sep/2018:18:56:51 +0200] Get-Printer-Attributes ipp://localhost/printers/HP-LaserJet-Pro-M12a
D [19/Sep/2018:18:56:51 +0200] [Client 5] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/HP-LaserJet-Pro-M12a) from localhost
D [19/Sep/2018:18:56:51 +0200] [Client 5] Content-Length: 10009
D [19/Sep/2018:18:56:51 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Sep/2018:18:56:51 +0200] [Client 5] con->http=0x55d69c690790
D [19/Sep/2018:18:56:51 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10009, response=0x55d69c48f470(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Sep/2018:18:56:51 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Sep/2018:18:56:51 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10009
D [19/Sep/2018:18:56:51 +0200] [Client 5] Flushing write buffer.
D [19/Sep/2018:18:56:51 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [19/Sep/2018:18:56:51 +0200] [Client 5] Waiting for request.
D [19/Sep/2018:18:56:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
I [19/Sep/2018:18:56:52 +0200] Expiring subscriptions...
D [19/Sep/2018:18:57:23 +0200] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [19/Sep/2018:18:57:23 +0200] [Client 5] Closing connection.
D [19/Sep/2018:18:57:23 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [19/Sep/2018:18:57:23 +0200] Expiring subscriptions...
I [19/Sep/2018:18:57:24 +0200] Expiring subscriptions...


What to do?



Edited 1 time(s). Last edit at 09/30/2018 04:21PM by rickrich.

Options: ReplyQuote
Re: Linux Mint 19 HP Laserjet Pro M12a Print error
Posted by: rickrich ()
Date: September 19, 2018 01:42PM

On Linux Mint 19, I ran synaptic and re-installed all the CUPS packages and now everything works.

http://foo2zjs.rkkda.com/forum/read.php?63,4215



Edited 2 time(s). Last edit at 09/30/2018 04:22PM by rickrich.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.