http://foo2zjs.rkkda.com/forum/list.php?12 Thu, 09 Sep 2010 21:34:26 -0400 Phorum 5.2.15a http://foo2zjs.rkkda.com/forum/read.php?12,2681,2681#msg-2681 http://foo2zjs.rkkda.com/forum/read.php?12,2681,2681#msg-2681 sambutoki HP LaserJet 1000 Sat, 31 Jul 2010 17:35:27 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,2342,2342#msg-2342 http://foo2zjs.rkkda.com/forum/read.php?12,2342,2342#msg-2342
i'm runnin gentoo (gentoox its an xbox1). And i tried what you told the other one. After all the foo2zjs-wrapper testpage worked! But, when i want to print the cups testpage it doesnt. You've got any idea what this could be?]]> hercules HP LaserJet 1000 Sun, 10 Jan 2010 13:03:48 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,2116,2116#msg-2116 http://foo2zjs.rkkda.com/forum/read.php?12,2116,2116#msg-2116
$ lsmod | grep usblp

Should say:

$ lsmod | grep usblp
usblp 14592 0]]> rickrich HP LaserJet 1000 Sat, 27 Feb 2010 18:03:42 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,2108,2108#msg-2108 http://foo2zjs.rkkda.com/forum/read.php?12,2108,2108#msg-2108 ilf HP LaserJet 1000 Sun, 06 Sep 2009 13:35:38 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,2026,2026#msg-2026 http://foo2zjs.rkkda.com/forum/read.php?12,2026,2026#msg-2026 I have done all the installation step for my HP Laserjet 1000 on ubuntu 9.04 and I can't have /dev/usb/lp0.
When my printer power off, I heard that the driver is send, but I can't print anything...

Can someone help me ?]]> chimaera HP LaserJet 1000 Thu, 10 Sep 2009 15:34:36 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,1800,1800#msg-1800 http://foo2zjs.rkkda.com/forum/read.php?12,1800,1800#msg-1800 i use "foo2zjs -r 600x600 -p 9 -z 1 -P" command line - it work file on 1018, but on 1000 picture is broken:


same printer work with windows drivers without troubles]]> edo HP LaserJet 1000 Fri, 10 Apr 2009 01:12:19 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,1740,1740#msg-1740 http://foo2zjs.rkkda.com/forum/read.php?12,1740,1740#msg-1740 the printer is connected and all drivers downloaded to it.
everything is fine except when i tell to print nothing happens...

can someone please help me with this
ty
hat]]> hatmancan HP LaserJet 1000 Fri, 13 Feb 2009 09:08:30 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,1495,1495#msg-1495 http://foo2zjs.rkkda.com/forum/read.php?12,1495,1495#msg-1495 I don't get it working]]> beiken HP LaserJet 1000 Sun, 12 Oct 2008 18:28:20 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,1452,1452#msg-1452 http://foo2zjs.rkkda.com/forum/read.php?12,1452,1452#msg-1452
The printer is direct connected to an Ubuntu 8.04 machine and local prints work fine however if I try to print via the network the print arrives and can be "seen" as printing via the software queues, but nothing ever comes out the printer.

I've been digging at this for a while and can't wrap my head around where the problem may be.

Today I paused the printer and took a look at the prints residing in /var/spool/cups

When I do a file command on the two prints I come up with the local print being identified as
Postscript document text conforming at level 3.0

However the network print comes out as Zenographics ZjStream printer data (big-endian)

Anyone have any suggestions or ideas where I should look next.

Tks

Rick]]> beetham HP LaserJet 1000 Thu, 25 Sep 2008 15:52:17 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,1314,1314#msg-1314 http://foo2zjs.rkkda.com/forum/read.php?12,1314,1314#msg-1314
I've been searching hi and low on google but I could not find out why my printer is not printing.

I have installed the foo2zjs driver from the site several times and it still does not print.

The printer does accept the firmware and from windows in virtualbox I can print but not from my Kubuntu 8.04. The driver used to work in 7.10 but has never worked since I have upgraded to 8.04.

I am not sure what logs I should post here but I was thinking that I might have a CUPS configuration problem?

If somebody could help, it would be extremely appreciated.

Just let me know what information to post and I will do just that, post it.

Thanks in advance.]]> rsparhar HP LaserJet 1000 Thu, 24 Jul 2008 23:20:45 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,1164,1164#msg-1164 http://foo2zjs.rkkda.com/forum/read.php?12,1164,1164#msg-1164 seedsgrow HP LaserJet 1000 Tue, 22 Apr 2008 12:46:29 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,943,943#msg-943 http://foo2zjs.rkkda.com/forum/read.php?12,943,943#msg-943 With the previous macosx version, I used the Zenographics driver which somehow managed to load the firmware automatically.
How can I do the same auto-loading with Leopard?
In the worst case, maybe it would be sufficient to prepend the firmware to each and every job?]]> Stefan Monnier HP LaserJet 1000 Wed, 05 Mar 2008 15:50:09 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,905,905#msg-905 http://foo2zjs.rkkda.com/forum/read.php?12,905,905#msg-905 when i first installed it yesterday, it worked and printed couple pages

today i tried printing again, it didn't work.
i re-installed everything like yesterday but still the printer wouldn't print..
it would just cancel...

i'm lost.
can someone help please?]]> seokone HP LaserJet 1000 Thu, 21 Feb 2008 10:09:07 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,894,894#msg-894 http://foo2zjs.rkkda.com/forum/read.php?12,894,894#msg-894 my english in not very good !!
I work with ubuntu 7.10 and my printer is an HP 1000
from last week, impossible to print anything.
I have all uninstall, and install like the doc.
icon is in the bar, mais anything print !!

thank you

I look to the forum.
I have not directory /dev/usb/
Copy of the error log (cups)

E [11/Feb/2008:18:28:34 +0100] CUPS-Add-Modify-Printer: Unauthorized
E [11/Feb/2008:18:28:39 +0100] cupsdAuthorize: Empty Basic username!
E [11/Feb/2008:18:28:39 +0100] CUPS-Add-Modify-Printer: Unauthorized
E [11/Feb/2008:18:28:48 +0100] CUPS-Add-Modify-Printer: Unauthorized
E [11/Feb/2008:18:41:39 +0100] CUPS-Delete-Printer: Unauthorized
E [11/Feb/2008:18:43:19 +0100] [cups-driverd] Unable to open PPD directory "/opt/share/ppd": No such file or directory
E [11/Feb/2008:18:43:19 +0100] [cups-driverd] Unable to write "/var/cache/cups/ppds.dat" - Permission denied]]> francis HP LaserJet 1000 Tue, 12 Feb 2008 11:23:35 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,605,605#msg-605 http://foo2zjs.rkkda.com/forum/read.php?12,605,605#msg-605
I have tried to follow the installation instructions. One deviation is that there is not a hotplug port on OpenBSD. I was able to download and unpack the driver you provide, as well as getweb -ing the firmware. When I try to cat the firmware to the USB port, I can a std in / out error.:

$ cat sihp1000.dl > /dev/ulpt0
cat: stdout: Input/output error
$ sudo cat sihp1000.dl > /dev/ulpt0
Password:
cat: stdout: Input/output error

I have a snip of the error log here, if I could put it as an attachment I would but I don't see a way to do that. In the interest of getting you as much info as possible, I'm going to put it here:



------snip1
I [12/Oct/2007:19:17:22 -0500] Job 9 queued on "hplaserjet1000-2" by "root".
D [12/Oct/2007:19:17:22 -0500] Job 9 hold_until = 0
D [12/Oct/2007:19:17:22 -0500] Discarding unused printer-state-changed event...
D [12/Oct/2007:19:17:22 -0500] job-sheets=none,none
D [12/Oct/2007:19:17:22 -0500] banner_page = 0
D [12/Oct/2007:19:17:22 -0500] [Job 9] argv[0]="hplaserjet1000-2"
D [12/Oct/2007:19:17:22 -0500] [Job 9] argv[1]="9"
D [12/Oct/2007:19:17:22 -0500] [Job 9] argv[2]="root"
D [12/Oct/2007:19:17:22 -0500] [Job 9] argv[3]="Test Page"
--------snip2
I [12/Oct/2007:19:17:22 -0500] Started filter /usr/local/libexec/cups/filter/pstops (PID 2968) for job 9.
I [12/Oct/2007:19:17:22 -0500] Started filter /usr/local/libexec/cups/filter/foomatic-rip (PID 32628) for job 9.
I [12/Oct/2007:19:17:22 -0500] Started backend /usr/local/libexec/cups/backend/usb (PID 10129) for job 9.
D [12/Oct/2007:19:17:22 -0500] Discarding unused job-state event...
D [12/Oct/2007:19:17:22 -0500] cupsdProcessIPPRequest: 15 status_code=0 (successful-ok)
----------snip3
D [12/Oct/2007:19:17:22 -0500] PID 17024 (/usr/local/libexec/cups/cgi-bin/printers.cgi) exited with no errors.
E [12/Oct/2007:19:17:22 -0500] PID 10129 (/usr/local/libexec/cups/backend/usb) stopped with status 1!
E [12/Oct/2007:19:17:22 -0500] [Job 9] Unable to open USB device "usb:/dev/ulpt0": Permission denied
D [12/Oct/2007:19:17:22 -0500] Discarding unused printer-state-changed event...

-----snip4
D [12/Oct/2007:19:17:27 -0500] Discarding unused job-progress event...
D [12/Oct/2007:19:17:30 -0500] [Job 9] KID4 exited with status 9
D [12/Oct/2007:19:17:30 -0500] [Job 9] Process dying with "error closing *main::STDOUT", exit stat: 9
D [12/Oct/2007:19:17:30 -0500] [Job 9] Renderer exit stat: 9
D [12/Oct/2007:19:17:30 -0500] [Job 9] error closing *main::STDOUT
D [12/Oct/2007:19:17:30 -0500] [Job 9] KID3 finished
D [12/Oct/2007:19:17:30 -0500] [Job 9] Renderer process finished
D [12/Oct/2007:19:17:30 -0500] [Job 9] Killing process 19360 (KID3)
D [12/Oct/2007:19:17:30 -0500] [Job 9] Process dying with "Error closing renderer", exit stat: 9
D [12/Oct/2007:19:17:30 -0500] [Job 9] Error closing renderer
E [12/Oct/2007:19:17:31 -0500] PID 32628 (/usr/local/libexec/cups/filter/foomatic-rip) stopped with status 9!
D [12/Oct/2007:19:17:31 -0500] [Job 9] File 0 is complete.
I [12/Oct/2007:19:17:31 -0500] [Job 9] Backend returned status 1 (failed)
D [12/Oct/2007:19:17:31 -0500] Discarding unused printer-state-changed event...
D [12/Oct/2007:19:17:31 -0500] Discarding unused printer-state-changed event...
I [12/Oct/2007:19:17:31 -0500] Saving printers.conf...
D [12/Oct/2007:19:17:31 -0500] Discarding unused job-stopped event...
D [12/Oct/2007:19:17:32 -0500] Unloading job 9...
D [12/Oct/2007:19:17:32 -0500] cupsdReadClient: 10 GET /admin/log/error_log HTTP/1.1
D [12/Oct/2007:19:17:32 -0500] cupsdReadClient: 10 Browser asked for language "en-US.utf-8"...
D [12/Oct/2007:19:17:32 -0500] cupsdAuthorize: username="root"
-------


It looks like it may be permissions on the usb device. I tried to add read rights to the others as you see here:

$ sudo chmod u+r /dev/ulpt0
$ ls -la /dev/ulpt0
crw-rw---- 1 root wheel 64, 0 Oct 12 18:37 /dev/ulpt0
$ sudo chmod o+r /dev/ulpt0
$ ls -la /dev/ulpt0
crw-rw-r-- 1 root wheel 64, 0 Oct 12 18:37 /dev/ulpt0
$ ls -la /dev/ulpt0
crw-rw-r-- 1 root wheel 64, 0 Oct 12 18:37 /dev/ulpt0
$

any thoughts here?

I appreciate any help possible!

Thanks,
Nick]]> pc1oad1etter HP LaserJet 1000 Sat, 13 Oct 2007 05:58:24 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,362,362#msg-362 http://foo2zjs.rkkda.com/forum/read.php?12,362,362#msg-362 jpat100 HP LaserJet 1000 Wed, 09 May 2007 07:26:47 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,309,309#msg-309 http://foo2zjs.rkkda.com/forum/read.php?12,309,309#msg-309
To fix, I followed the default procedure on the foo2zjs site. It works perfectly with that driver.

Thanks,

dante2d]]> dante2d HP LaserJet 1000 Sun, 15 Apr 2007 23:13:21 -0400 http://foo2zjs.rkkda.com/forum/read.php?12,6,6#msg-6 http://foo2zjs.rkkda.com/forum/read.php?12,6,6#msg-6
I purchased a Maxtor Shared Storage Plus (MSS), and have installed the OpenMSS firmware, which basically gives me Telnet/SSH access to the Linux machine inside (http://www.openmss.org)

The box itself doesn't compile anything, but a friendly guy on the OpenMSS forum has compiled the driver for me (our conversation is at http://www.openmss.org/forum/viewtopic.php?p=2514#2514). I've also read the posts in as much depth as I can at another forum (http://www.linuxprinting.org/show_printer.cgi?recnum=HP-LaserJet_1000), which went into pretty good depth but unfortunately wasn't too useful for my MSS.

So I've extracted the tarball to my /opt/etc directory, and can plug the printer into one of the USB ports at the back of the MSS. But from there I don't know what to do.

I can't run a make command (but I'm assuming the guy at the forum did all that, so I shouldn't need to). He has also downloaded the firmware for my LaserJet 1000 (he called it sihp1000.img and put it in the foo2zjs directory for me)

Do you have any suggestions for how I would install the printer and the firmware hotplug from here? I hope I'm not asking for too much, but actual verbatim commands that I can use in SSH would be the most helpful.

Thanks very much]]> goakenny HP LaserJet 1000 Fri, 22 Dec 2006 14:32:17 -0500 http://foo2zjs.rkkda.com/forum/read.php?12,2,2#msg-2 http://foo2zjs.rkkda.com/forum/read.php?12,2,2#msg-2 Picture: http://www.freewebtown.com/lilisoft/picture.jpg ,
Printed Picture: http://www.freewebtown.com/lilisoft/printed.jpg
(look at the area around the nose).
I am using ghostscrip : GPL Ghostscript 8.54 (2006-05-17) , and the latest foo2zjs driver from this site (downloaded on dec,9 2006.).

It is interested that when I was using foo2zjs 2 years ago on SuSE with Ghostscript version, I think 7.07, printing picture works great...
Now I am using Gentoo.]]> kunalagon HP LaserJet 1000 Sun, 17 Dec 2006 18:55:57 -0500